Samsung SF-5100 manual Attach the handset cradle to the main body

Page 15

02-Installation 2000/04/03 3:24 PM Page 8

3.Attach the handset cradle to the main body.

Insert the two tabs of the cradle into the slots on the left side of the machine as shown, and while pressing part A on the bottom of the cradle, push the cradle toward the machine until it clicks into place.

A
0	0
0
0
	0
	0
	0
	0
	0
	0		0
	0		0
		00
		0
	0	0
Note:

•There is a one-touch plate built under the handset cradle. You can use this plate with the supplied one-touch label sheet. Write information on the label to remind you which number is stored in each position and attach the label on the plate.

To find the desired number, rotate the plate facing you and slide it under the cradle when you are using the plate.

	0
	0	0
	0	0
		0
	0	00
	0	00
	0	00
	0		0
	0		0
	0		0
	0		00
	0
	0
		00	0
		0	0

•If you want to remove the cradle, while pushing up the part A , on the bottom of the cradle, slide the cradle down, then take it out.

0

0

0 0

• If your hearing is bad and you want a louder speaker, set the lever on the handset to the right position. You can hear louder sound from the handset.

00

0

1.6 Installation

Image 15

Contents Laser Facsimile Trademark Notices Contents Automatic dialing Receiving a faxMaking a copy Other functionsMaintenance TroubleshootingImportant safety information Precautions Symbology Safety notesInstallation Unpacking Front view Control locations and functions Rear view Paper exit tray Setting up your machineChoosing a location Document trayHandset and handset cradle Document exit trayAttach the handset cradle to the main body AC power cord Telephone lineExtension phone optional Installing the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Printing a demo Getting started Using the control panel Setup Entering alphanumeric characters Using the number keypadKeypad Character Assignments Entering numbers Editing numbers or nameInserting pause Press Start/Enter when the name on the display is correct Setting up your fax number and nameSetting the time and date Press !or ❿ until ‘TIME/DATE SETUP’ appears, then pressEnter the correct time and date using the number keypad Alarm volume/Key volume Adjusting volumeRinger volume Speaker volumeBasic operation Preparing documents for faxing or copying Sending a faxSetting document resolution and contrast ResolutionContrast Loading document Confirming transmission Canceling transmissionSending a fax automatically Sending a fax after talkingAnswering a voice request Voice requestAutomatic redial Sending a voice requestReceiving modes Receiving a faxReceiving automatically in FAX mode Receiving manually in TEL modeDistinctive ring pattern detection Drpd Receiving automatically in ANS/FAX mode Receiving in Auto modeReceiving manually using an extension telephone Making a simple copy Copying overviewAdvanced copy features Press or ❿ to choose on or OFFPress Copy or Start/Enter to begin the copy operation Press and hold Redial/Pause for 2 seconds RedialTo redial the number last called To search through redial memoryMonitoring a dual job status Sending a recallStoring a number for one-touch dialing One-touch dialingSending a fax using a one-touch number Editing a number for one-touch dialingIf you do not want to assign a name, skip this step Enter the number you want to store, then press Start/Enter Speed dialingStoring a number for speed dialing Press and hold Speed for 2 secondsEditing a number for speed dialing Sending a fax using a speed numberSearching for a number in the memory Searching sequentially through the memorySearching with a particular first letter Advanced fax Press Advanced FAX on the control panel BroadcastingJOB ❿CANCEL ❿DONE Delayed faxTIME1330=1330 Priority fax Press or ❿ to select YES or no What is polling?Polling Send pollingReceive polling If you want to cancel the operation, press Stop at any timeCanceling a scheduled operation Adding documents to a scheduled operationPress or ❿ until ‘ADD SCHEDULE’ appears, then press Additional features Help List Printing reportsSystem setup Setting an optionPress or ❿ until ‘SYSTEM Setup ’appears, then press Selectable options Additional features Additional features Additional features Press Setup on the control panel Press or ❿ until you find ‘GROUP Dial SETUP’, then pressStoring one-touch or speed dial numbers for group dial- ing Editing group dial numbers Sending a fax using group dialing Multi-address transmissionPress or ❿ until ‘MEMORY CLEAR’ appears, then press Clearing memoryTroubleshooting Document jams while sending a fax Clearing jamsPaper jams while the machine is printing If Jammed in the Printer Output Area Tips for avoiding paper jams Display Meaning Solution LCD error messagesPaper JAM Symptom Cause and Solution Fixing problemsSymptom Cause and Solution Cleaning the OPC drum Press or ❿ until ‘MAINTENANCE’ appears, then pressPress Stop to return to standby mode Adjusting shading Setting the machine to be checked by phonePress or ❿ until you find ‘ADJUST SHADING’, then press Sending toner low information to the service company Cleaning the document scannerOpen the control panel using your hand Disassemble the white roller as follows Carefully wipe the scanning glass with a soft, dry cloth Managing the toner cartridge Expected cartridge lifeReplacing the toner cartridge Pulling the cover release buttons toward you, open the cover Close the cover firmly Memo Appendix Canadian radio interference regulations FCC regulationsParty Responsible for Product Compliance Information to UserLaser safety statement Safety information Power saver Pabx SpecificationsIndex Appendix Appendix Electronics