10Additional information
Problem
Color problems occur with your monitor after changing the HDMI Color setting (page 27).
Remedy
•Depending on the connected equipment, some HDMI Color settings may cause the picture to be displayed incorrectly. In this case, use the TV’s own video input settings to select RGB, if possible. Alternatively, revert to the previous HDMI Color setting.
Error Messages
Message | Description |
LINE ON | • An operation is prohibited because the Line Out mode is on (page 33). |
|
|
EXTRAPWR | • You cannot adjust SFC modes or tone controls (bass, treble, and bass boost) |
| when using Extra Power mode. |
|
|
SND. DEMO | • The sound demo is on. See General in Troubleshooting on page 41. |
|
|
CANNOT | • An operation is prohibited because DVD/CD or USB isn’t selected, headphones |
| are connected, or TEST TONE is pressed during disc playback. |
|
|
MUTING | • An operation is prohibited because the sound is muted (press MUTE). |
|
|
STEREO | • An operation is prohibited because the DVD/CD or USB function isn’t selected. |
|
|
TRAYLOCK | • The tray lock is on. See General in Troubleshooting on page 41. |
|
|
KEYLOCK | • The key lock is enabled. See Setting the Key Lock below. |
|
|
USB ERR | • See Important in Using the USB interface on page 23 for more on this. |
|
|
HDMI ERR | • See HDMI connection above for troubleshooting tips. See also Resetting the |
| HDMI connection on page 34 if the problem persists. |
|
|
EEP ERR | • Contact your Pioneer authorized service center or your dealer for servicing. |
|
|
EXIT | • Appears when a menu is automatically exited after a set period of inactivity. |
|
|
Resetting the system
Use the front panel controls to reset all system settings to the factory default.
•With the system on, press STANDBY/ ON while holding down USB.
The next time you switch on, all the system settings should be reset.
Setting the Key Lock
You can disable the front panel buttons by switching the Key Lock feature on.
1With the system in standby, press SETUP and use / to choose KEYLOCK then press
ENTER.
This is shown in the front panel display.
44
2Use / to select LOCK ON or LOCK OFF then press ENTER.
Using the language code list
Some of the language options (see Language settings on page 28) allow you to set your preferred language from any of the 136 languages in the Language code list below.
1Select ‘Other Language’.
2Use / to select either a code letter or a code number.
3Use / to select a code letter or a code number.
See the Language code list below for a complete list of languages and codes.
En