Mitsubishi Electronics DX-TL950E operation manual Auto SET UP, Turn the Shuttle ring clockwise

AUTO SET UP

■AUTO SET UP

AUTO SET UP is displayed, in order to set up an indispen- sable function, when this unit is turned on for the first time.

Only when the unit is turned on for the first time, the AUTO SET UP screen is displayed automatically. It is not automatically displayed after next time.

1.After connect the cameras and the monitors, turn on the MAIN switch on the rear of the unit and wait until the ACCESS indicator is turned off, then press the POWER button on the front.

•The <LANGUAGE SELECTION> screen is displayed. The language of the menu can be selected in this screen.

<LANGUAGE SELECTION>

>>LANGUAGEENGLISH

EXECUTE

JOG :SELECT

SHUTTLE>>:EXECUTE

POWER button operation will not be accepted while the ACCESS indicator is flashing. Press the POWER button after the indicator turns off.

2.Turn the SHUTTLE ring clockwise.

•The background of the setting changes to red and flashes.

•Setting ( default : “ENGLISH” )

“ENGLISH”, “FRANCAIS”, “DEUTSCH”, “ESPAÑ OL”, “PyCCKNN”, “ITALIANO”

3.Turn the JOG dial to display the desired setting and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

Beware while setting the AUTO SET UP, the menu screen can not be exited. Furthermore the screen al- ready set can not be displayed again.

4.Turn the JOG dial to move the cursor to “EXECUTE”, and turn the SHUTTLE ring clockwise.

•The <TIME DATE ADJUST> screen appears.

•The date/time is set in this screen.

<TIME DATE ADJUST>		OFF
>>DAYLIGHT SAVING
DAY		01
MONTH		01
YEAR		2004
TIME		00:00:00
APPLY
EXECUTE
JOG	:SELECT

SHUTTLE>>:EXECUTE

5. Set the desired setting in this screen referring to “♦

DAYLIGHT SAVING/DAYLIGHT SETTING ( see page 20)”,

“♦TIME DATE ADJUST ( see pages 20,21)”.

By turning the JOG dial to the cursor to “APPLY” and turn the SHUTTLE ring clockwise, “00:00:00” of “TIME” will start after the moment of turning the SHUT- TLE ring.

6.Turn the JOG dial to move the cursor to “EXECUTE”, and turn the SHUTTLE ring clockwise.

•“PERFORM AUTO SET UP?” is displayed on the screen.

PERFORM AUTO SET UP?

>>YES

NO

SHUTTLE>>:EXECUTE

7-1. (When not execute AUTO SET UP • • • )

Select “NO” by turning the JOG dial and turn the SHUTTLE ring clockwise.

•“SETTING UP...” is displayed on the screen, and the unit starts-up.

7-2. (When execute AUTO SET UP • • • )

Select “YES” by turning the JOG dial and turn the SHUTTLE ring clockwise.

•The <CAMERA CHECK> screen appears.

•The cameras connected and the video condition can be confirmed in this screen.

<CAMERA CHECK>

>>EXECUTE

CHECK CAMERA CONNECTION AND

IMAGE BEFORE EXECUTE

SHUTTLE>>:EXECUTE

8.Turn the SHUTTLE ring clockwise.

•The <AUTO RECORD SETTING> screen appears.

•The period of the record can be set.

•Setting of AUTO RECORD SETTING ( default : “24H” )

“24H”, “48H”, “72H”, “96H”, “120H”, “144H”, “1WEEK”, “2WEEK”, “3WEEK”, “1MONTH”, “2MONTH”, “3MONTH”, “4MONTH”, “5MONTH”, “6MONTH”, “1YEAR”

<AUTO RECORD SETTING>
>>RECORDING CYCLE		24H
EXECUTE
JOG	:SELECT
SHUTTLE>>:EXECUTE

9.Turn the SHUTTLE ring clockwise.

•The background of the setting changes to red and flashes.

10.Turn the JOG dial to display the desire setting and turn the SHUUTLE ring cloclwise.

•The setting is confirmed and flashing stop.

11.Turn the JOG dial to move the cursor to “EXECUTE”, and turn the SHUTTLE ring clockwise.

•The <RECORD SETTING> screen appears.

•The recording interval and recording picture quality of normal recording and alarm recording corresponding to each camera numbers can be set in this screen.

ENGLISH

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• AUTO SET UP

17