Mitsubishi Electronics DX-TL950E Quick Settings, To update menu settings of this unit

<QUICK SETTINGS>

■QUICK SETTINGS

Menu settings stored on the Compact Flash Card can be read and altered with the unit. Menu settings in the unit can be copied to the Compact Flash Card.

During execution of menu quick settings, other op- erations are not accepted.

♦To update menu settings of this unit

To read/alter menu settings stored on the Compact Flash Card using the unit, synchronize the HDD setting to that of the unit the menu settings were copied to. The HDD setting that needs to be synchronized is the “HDD SETTING”, and “PARTITION SIZE”.

If the HDD settings are not synchronized, the menu settings are not updated.

1.Insert a Compact Flash Card recorded with menu settings into the COMPACT FLASH slot of this unit.

2.Select “QUICK SETTINGS” in the <SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <QUICK SETTINGS> screen appears.

<QUICK SETTINGS>

>>LOAD SETTING DATA FROM CFC SAVE SETTING DATA TO CFC

3.Select “LOAD SETTING DATA FROM CFC” and turn the SHUTTLE ring clockwise.

•The <SETTING DATA LOADING> screen appears.

•To cancel the update of menu settings, turn the SHUTTLE ring counterclockwise.

<SETTING DATA LOADING>

>>EXECUTE

SHUTTLE>>:EXECUTE,<<:BACK

4.Turn the SHUTTLE ring clockwise.

•The menu settings of this unit is updated and <<COMPLETED>> appears on the screen.

•When no Compact Flash Card has been inserted <<MEDIA NONE>> will appear on the screen.

Turn off POWER to finalize updated menu settings.

When data with setting changes for any one item of “IP ADDRESS”, “SUB NET MASK”, “GATEWAY”, “SERVICE PORT SETTING” on the <ETHERNET> screen or “IP ADDRESS”, “TARGET” or “OWN” of the <ALARM NOTIFICATION SETTING> settings are read out or when settings are changed, restart is performed after the power has been cut.

After menu read-out has been completed, the time is not reflected and the correct time should be set.

5. (Finalizing updated menu settings • • • )

Turn the SHUTTLE ring counterclockwise three times, or return to normal screen by pressing the SET UP button.

6.Press the POWER button to turn the unit off, then press it once more to turn the unit back on.

•The setting is confirmed.

♦To save menu settings of this unit to a Compact Flash Card

1.Insert a Compact Flash Card into the COMPACT FLASH slot of this unit.

2.Select “QUICK SETTINGS” in the <SETTINGS> screen and turn the SHUTTLE ring clockwise.

•The <QUICK SETTINGS> screen appears.

3.Select “SAVE SETTING DATA TO CFC” and turn the SHUTTLE ring clockwise.

•The <SETTING DATA SAVING> screen appears.

•When not saving the menu settings to the Compact Flash Card, turn the SHUTTLE ring counterclockwise.

<SETTING DATA SAVING>

>>EXECUTE

SHUTTLE>>:EXECUTE,<<:BACK

4.Turn the SHUTTLE ring clockwise.

•The menu settings are overwritten in the Compact Flash Card and <<COMPLETED>> appears on the screen.

•When no Compact Flash Card has been inserted <<MEDIA NONE>> will appear on the screen.

5.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

Menu read-out, setting change, and menu copying can be performed only when this unit is stopped (stop of playback/recording/communication).

For LOAD/SAVE in the menu sometimes it takes a few seconds immediately after perform “EXECUTE”.

ENGLISH

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

59