Mitsubishi Electronics DX-TL950E operation manual Main

• No inserted media as Compact Flash.

• Video signal was lost for more than 5 seconds during recording.

Warnings and CALL OUT output

■Warnings and their appropriate countermeasures

#1 Options in the CALL OUT options column:

• Selectable	: CALL OUT output can be selected/de-selected on the menu.
• Fixed	:	a CALL OUT signal is emitted without prior selection of this function using the menu.
• None	:	no CALL OUT signal is emitted, but a warning indicator will appear on screen.

CALL OUT signal output can be stopped by pressing the WARNING RESET button.

ENGLISH

Warning Display

REC/FULL

REC/SUB FULL

COPY/FULL

REST/FULL

REC/REM

Status	Countermeasure	Canceling	Code
		the warning
• MAIN HDD recordable	• When the warning is	Press the	WNG1100
capacity is full.	cancelled, the unit will start	WARNING
	over-writing the oldest data	RESET button.
• SUB HDD recordable	remaining in the hard disk		WNG1101
capacity is full.	drive.
	• Copy data as necessary.
• Media recordable	• Replace with new media.	Press the	WNG3100
capacity is full.	• Replace media if necess	WARNING	WNG4100
	-ary.	RESET button.
• The remaining HDD capa	• Copy data as necessary.	Press the	WNG1200
-city has reached the value		WARNING	(MAIN)
set in HDD REMAIN.		RESET button. WNG1201
			(SUB)

CALL OUT

output page #1

Selectable 47

72,73

None -

-

Selectable 72,73

COPY/SIZE/	• The data that is being
DATA ERROR copied exceeds the
REST/SIZE/	capacity ofCompact Flash
DATA ERROR Card, or there is no
	original data.
	It restored from the
	Compact Flash of a
	different format.
COPY/	• Error has occurred in the

MEDIA ERROR media as Compact Flash. REST/

MEDIA ERROR COPY/NO MEDIA REST/NO MEDIA

NO SIGNAL

(The warning will indicate the number of the non-functioning camera. )

• Set the copy/restore	Press the	WNG3701	None	72,73
range again.	WARNING	WNG4701
• Replace with new media.	RESET button.			-

• Check media in recording	Press the	WNG3702	None	11,72
device. (Insert the media	WARNING	WNG4702
if there is none.)	RESET button.
• Insert the media.	Press the	WNG3703	None	11,72
	WARNING	WNG4703
	RESET button.
• Check whether the unit	Stop recording. WNG54		#3 Fixed	15
and camera are properly
connected, and that electri
-city is on.
• Check whether the visual	Output video			36
signal is being properly	signals.
outputted.
• Check to see if there is a	Press the			22,23,
camera set for operation	WARNING			41-43
with no video signal input.	RESET button.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output

87