Mitsubishi Electronics DX-TL950E Remain HDD, Setting of Device default Main, Call OUT Settings

<INITIAL SET UP/INFORMATION> (continued)

Setting ( default : “OFF” )

“REMAIN”, “WARNING”, “ALARM”, “OFF”

SETTING	REMAIN	WARNING ALARM OFF
BUZZER
When reaching the remaining	ON	OFF	OFF	OFF
capacity set in “REMAIN HDD”
When a failure occurs and	OFF	ON	OFF	OFF
a warning is displayed
When an alarm recording or	OFF	OFF	ON	OFF
emergency recording is started

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “BUZZER” in the <REAR TERMINAL SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

♦REMAIN HDD

A warning indicating that the either remaining capacity of HDD has become low during recording is outputted. The device can be selected and the remaining capacity can be set here.

<REAR	TERMINAL SETTINGS>			OFF
MODE	OUT	1
MODE	OUT	2		OFF
MODE	OUT	3		OFF
MODE	OUT	4		OFF
MODE	OUT	5		OFF
KEY SOUND				ON
BUZZER				OFF
>>REMAIN HDD			MAIN-10%
CALL OUT SETTINGS				10M
EMERGENCY REC DURATION

A warning is outputted using the following methods when the remaining capacity becomes low during re- cording.

•The HDD usage display flashes when “3” is set to “DISPLAY MODE” in the <TIME DATE/DISPLAY SET- TINGS> screen.

•A buzzer will sound when “REMAIN” is set to “BUZZER” in the <REAR TERMINAL SETTINGS> screen.

Setting of DEVICE ( default : “MAIN” )

“MAIN” : Displays a warning of low MAIN HDD capacity.

“SUB” : Displays a warning of low SUB HDD capacity.

“OFF” : Does not display warning of low capacity.

“SUB” is appeared when “PARTITION” is selected on “HDD SETTING” of the <INITIALIZATION> screen.

Setting of “REMAIN HDD” ( default : “10%” )

“2%”, “4%”, “6%”, “8%”, “10%”, “15%”,“20%”, “30%”, “40%”, “50%”

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } “Select “REMAIN HDD” in the <REAR TERMINAL SETTINGS> screen and turn the SHUTTLE ring clockwise twice.

•The setting display reverses in color when the SHUTTLE ring is turned the first time. When the ring is turned for the second time, the background turns red and flashes.

2.Turn the JOG dial to display the desired device and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

3.Turn the JOG dial clockwise to move the reversed display to the REMAIN HDD value and turn the SHUTTLE ring clockwise.

•The background of the REMAIN HDD value turns red and flashes.

4.Turn the JOG dial to display the desired capacity and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

5.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

♦CALL OUT SETTINGS

The CALL OUT setting is a setting to notify to the out- side warning signals outputted by this device by outputting the signals from the CALL OUT terminal on the rear.

CALL OUT SETTINGS use photo-coupler output to decrease the amount of malfunctions due to wiring. See page 15 “CALL OUT Output terminal” for apt connection procedures.

• HDD MAIN REMAIN/HDD SUB REMAIN

When the remaining memory in the HDD reaches the set value, the unit outputs a signal from the CALL OUT terminal, and the “REC/REM” warning displayed on the screen.

<CALL OUT		SETTINGS>	OFF
>>HDD	MAIN	REMAIN
HDD	MAIN	FULL	OFF
HDD	SUB REMAIN		OFF
HDD	SUB FULL		OFF

“HDD SUB REMAIN” is appeared when “PARTITION” is selected on “HDD SETTING” of the <INITIALIZATION> screen.

Setting ( default : “OFF” )

“2%”, “4%”, “6%”, “8%”, “10%”, “15%”, “20%”, “30%”, “40%”, “50%”, “OFF”

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } <REAR TERMINAL SETTINGS> } Select “HDD MAIN REMAIN” or “HDD SUB REMAIN” in the <CALL OUT SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

By pressing the WARNING RESET button, the HDD capacity warning from the CALL OUT terminal can be cancelled.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

50