<INITIAL SET UP/INFORMATION>
■HDD SETTINGS
♦HDD REPEAT REC MAIN/HDD REPEAT REC SUB
The operation when HDD (Hard Disk Drive) space be- comes full during recording.
<HDD | SETTINGS> | ON | |
>>HDD | REPEAT | REC MAIN | |
HDD | REPEAT | REC SUB | OFF |
HDD | REPEAT | PLAY | OFF |
OFF | |||
SEQUENTIAL | PLAY | OFF | |
“HDD REPEAT REC SUB” is appeared when “PARTITION” is selected on “HDD SETTING” of the <INITIALIZATION> screen.
Setting ( default of HDD REPEAT REC MAIN : “ON”, default
of HDD REPEAT REC SUB : “OFF”)
“ON” : Automatically returns to the beginning of the HDD and resumes recording (by overwriting old data).
“STANDBY” : When the HDD space becomes empty, recording is stopped and the unit switches to the standby mode. Recording is resumed when the REC terminal is grounded or the REC button is pressed. Recording is temporarily stopped if the alarm input is continuously grounded or during timer recording. Then, recording is resumed from the beginning of the HDD.
“OFF” : Recording is stopped and “REC/FULL” or “REC/ SUB FULL” is displayed on the screen. To resume re- cording, press the WARNING RESET button to cancel the warning display and press the REC button.
If either the WARNING “REC/FULL” or “REC/SUB FULL” appears when the ALARM PARTITION is set, re- cording on both will stop.
“STANDBY” is displayed only in “HDD REPEAT REC MAIN”.
1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT REC MAIN” or “HDD REPEAT REC SUB” in the <HDD SETTINGS> screen. Display the desired setting and confirm.
2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.
♦HDD REPEAT PLAY
The contents recorded on the HDD (Hard Disk Drive) can be repeatedly played back.
<HDD | SETTINGS> | ON | |
HDD | REPEAT | REC MAIN | |
HDD | REPEAT | REC SUB | OFF |
>>HDD | REPEAT | PLAY | OFF |
OFF | |||
SEQUENTIAL | PLAY | OFF | |
Setting ( default : “OFF” )
“ON” : After the recorded data is played back to the end, playback is resumed by automatically returning to the beginning of the recorded data.
“OFF” : After the recorded data is played back to the end, playback is stopped.
1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT PLAY” in the <HDD SETTINGS> screen. Display the desired setting and confirm.
2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.
♦IM-CHECK PLAY
This function is to check whether alterations have been made to the recorded video or the recording date/time. “IMAGE MODIFIED” warning is displayed when alteration is checked.
<HDD | SETTINGS> | ON |
HDD | REPEAT REC MAIN | |
HDD | REPEAT REC SUB | OFF |
HDD | REPEAT PLAY | OFF |
OFF | ||
SEQUENTIAL PLAY | OFF | |
Setting ( default : “OFF” )
“ON” : Alteration check is performed during playback and displays a warning at the point containing altera- tion.
“OFF” : Alteration check is not performed.
This function may cause problems during recording and playback. Normally, set this function to “OFF”.
1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select
2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.
3.Select the device for alteration check and then start playback.
Warning will also be displayed for parts where re- corded data is damaged for some reason.
IMAGE MODIFIED( 1 2 3 )
When performing complex playback operations with the SHUTTLE ring during alteration check, the “IMAGE MODIFIED” warning may appear. Perform alteration check using playback or playback with changed play- back intervals.
ENGLISH |
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
47