Mitsubishi Electronics DX-TL950E Flowchart for connection and settings, Auto SET UP

Flowchart

■Flowchart for connection and settings

Installation example :

This is an example operational flowchart of the following : making connections at the rear of the terminal ; setting HDD mode to PARTITION ; making default settings ; making an Alarm recording with Timer mode ; searching recorded data with ALARM LIST SEARCH ; using playback, and copying to a Compact Flash Card.

Connection to the terminals on the back Connection to the terminals on the back

• Connection to the terminals on the back.

See “■ Connecting to CCTV camera, monitor, sensor”, page 15.

• Connection to the alarm recording.

See “n Alarm Recording Connection”, page 16 and “n Rear View” , pages 13,14.

• Connection to the terminals on the back.

See “■ Connecting to CCTV camera, monitor, sensor”, page 15.

• Connection to the alarm recording.

See “n Alarm Recording Connection”, page 16 and “n Rear View” , pages 13,14.

The unit is booted

AUTO SET UP

• Setting the auto set up.

See “■ AUTO SET UP”, pages 17,18.

Only when the unit is turned on for the first time, the <AUTO SET UP> screen is displayed automatically. It is not automatically displayed after next time.

Selecting the “YES” in “PERFORM AUTO SET UP?” setting.

Recording

The unit is booted

AUTO SET UP

• Setting the auto set up.

See “■ AUTO SET UP”, pages 17,18.

Only when the unit is turned on for the first time, the <AUTO SET UP> screen is displayed automatically. It is not automatically displayed after next time.

Selecting the “NO” in “PERFORM AUTO SET UP?” setting.

Making the HDD REC SETTING

•Setting the PARTITION. “♦PARTITION/PARTITION SIZE” default settings “NORMAL” } “PARTITION”.

See “♦PARTITION/PARTITION SIZE”, page 75.

Changing the initial menu settings

• Setting the language.

See “■ LANGUAGE SELECTION”, page 25.

• Setting the present time and screen display.

See “<TIME DATE/DISPLAY SETTINGS>”, pages 32-34.

• Setting the present time.

See “♦TIME DATE ADJUST”, pages 20,21.

• Setting the display mode.

See “■ DISPLAY MODE”, page 32.

• Setting the audio recording.

See “■ AUDIO RECORDING”, page 48 and “■ Continuous recording time table”, pages 83,84.

Setting the HDD (hard disk drive) mode

• Setting the repeat recording.

See “♦HDD REPEAT REC MAIN/HDD

REPEAT REC SUB”, page 47.

• Setting the remain HDD capacity.

See “♦REMAIN HDD”, page 50.

• Setting the call out.

See “• HDD MAIN REMAIN/HDD SUB REMAIN”, pages 50,51 and “• HDD MAIN FULL/ HDD SUB FULL”, page 51.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••

8