Mitsubishi Electronics DX-TL950E Copying from unit to videotape, Back see Sequential PLAY

For the recordable time when copying to a Com-

pact Flash Card, see page 84.

This image data is administrated in 1MB unit. Therefore, the copied area may be larger than the set area because copying is performed in 1MB units that include the specify area.

■Copying from unit to videotape

Data can be copied even when the unit is recording. For recording operations, see the instruction manual accom- panying the analog video cassette recorder.

To VIDEO OUT	To AUDIO OUT
terminal	terminal
VIDEO CORD	AUDIO CORD
(commercially	(commercially
available cable)	available cable,
	if necessary)
To VIDEO IN	To AUDIO IN
terminal	terminal

ANALOGUE VIDEO CASSETTE RECORDER

1.[Analogue video cassette recorder] Prepare the unit for recording.

•First, set the input source to the external input connecting this unit.

2.[This unit] Press the SPLIT/SEQUENCE button to select

the screen type to play back ( see page 36).

•Single screen, SPLIT4 (a, b and c) screen and SPLIT9 screen can be selected.

It is also possible to copy the video of each cam- era in order using single screen sequential play-

back ( see “SEQUENTIAL PLAY”, page 48).

3.[This unit] Use the search function to move to the beginning

of the video to copy ( see “START/END SEARCH”, page 71).

4.[Analogue video cassette recorder] Start recording.

5.[This unit] Press the PLAY button to start playback.

6.To stop copying, press the STOP button of this unit. After stopping playback, stop the recording on the analogue video cassette recorder.

Only video recorded of camera number dis- played on the screen can be copied to videotape.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

ENGLISH

Operations

73