JVC XV-SA75GD manual Getting started, Connections, Before making any connections

6$￿￿￿(1*￿ERRN￿￿3DJH￿￿￿￿￿0RQGD\￿￿-XQH￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿30

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a conventional TV

You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment. (See the following pages.)

Getting started

The unit

SUBWOOFER	CENTER	RIGHT	LEFT		If the TV has an AV COMPU LINK terminal,
			REAR
					you can use the AV COMPU LINK function.
			VIDEO
		RIGHT	LEFT		AV COMPU LINK
PCM / STREAM				COMPONENT	See “AV COMPU LINK remote control
				Y PB PR	system” on page 64 for details.
			FRONT
OPTICAL COAXIAL			S-VIDEO
DIGITAL OUT		AUDIO OUT		VIDEO OUT
	Red			S-video cable		T V
	White		Yellow	(not supplied)		IN
						S-VIDEO
					Yellow	VIDEO
					White	LEFT
				Audio/Video cable		AUDIO
						RIGHT
				(supplied)		Red

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection.

NOTES

•When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see “How to make the Progressive scan mode active” on page 17.

•When making the audio connection using the FRONT (LEFT and RIGHT) jacks, set “DOWN MIX” in “PREFERENCE 2” to “Lo/ Ro” and the Speaker setting in “SPK. SETTING” to “2 CHANNEL” (see page 57 and 59).

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

16