JVC XV-SA75GD manual Audio and system preference

6$￿￿￿(1*￿ERRN￿￿3DJH￿￿￿￿￿0RQGD\￿￿-XQH￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿30

Initial settings

MONITOR TYPE				PROGRESSIVE MODE
You can select the monitor				You can select the
type to match your TV	PREFERENCE1	PREFERENCE2	SPK. SETTING	progressive mode from the	PREFERENCE1	PREFERENCE2	SPK. SETTING
	MENU LANGUAGE		ENGLISH		MENU LANGUAGE		ENGLISH
when you playback DVD
	AUDIO LANGUAGE		ENGLISH	following options.	AUDIO LANGUAGE		ENGLISH
VIDEO discs recorded for	SUBTITLE		OFF		SUBTITLE		OFF
	ON SCREEN LANGUAGE		ENGLISH		ON SCREEN LANGUAGE		ENGLISH
wide screen televisions.	ON SCREEN GUIDE		ON		ON SCREEN GUIDE		ON
	MONITOR TYPE		4:3 LB		MONITOR TYPE		4:3 LB
	PROGRESSIVE MODE		AUTO		PROGRESSIVE MODE		AUTO
	SELECT	KEY			SELECT	KEY

Initial settings

•4:3 LB (Letter Box Conversion)

Should be selected when you connect a normal TV to the unit.

When you play a wide picture recorded on a DVD VIDEO disc, the picture is displayed with bands across the upper and lower portions of the screen.

•4:3 PS (Pan Scan Conversion)

Should be selected when you connect a normal TV to the unit.

When you play a wide picture recorded on a DVD VIDEO disc, a portion of the picture is automatically cut off from the

left and right sides of the image.

Depending on the disc, it may not be possible to playback in this mode. In that case, the picture is

played back as in 4:3 LB mode.

•16:9 AUTO (Wide Television screen)

Should be selected when you connect a wide-screen TV to the unit.

•16:9 NORMAL (Wide Television screen)

Should be selected when you connect the unit to a wide-screen TV whose aspect ratio is fixed to 16:9 (the unit automatically adjusts the screen width of the output signal correctly when playing back a “4:3” source).

NOTES

•If a disc does not support “4:3 Pan Scan”, the letter box screen appears even if you set the MONITOR TYPE to

“4:3 LB ”.

•If you playback a “4:3” DVD VIDEO source with the “16:9 NORMAL” mode, the picture character slightly changes due to the process for converting the picture width.

•AUTO

The unit recognizes the picture type (film or video source) of the current disc according to the disc information.

•VIDEO 1

Suitable for playing back a video source disc with static (inactive) pictures.

•VIDEO 2

Suitable for playing back a video source disc with dynamic (active) pictures.

•FILM

Suitable for playing back a film or progressive source disc.

•SMART

Used to playback a disc containing both video and film source materials. The unit recognizes the picture type according to the current data.

*Normally, set the PROGRESSIVE MODE to “AUTO”.

*Some DVD VIDEO discs may not be played back correctly with the “AUTO” mode. If the playback picture is unclear or noisy with a particular DVD VIDEO disc, try to change the mode.

NOTE

•When playing back a film-source DVD VIDEO disc with the “PROGRESSIVE MODE” set to “FILM”, “SMART” or “AUTO” and the progressive scan mode is active, the PROGRESSIVE indicator on the front panel lights. (See page 17.)

Audio and system preference

The “PREFERENCE 2” display handles preferences related to audio and system.

DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device	PREFERENCE1	PREFERENCE2 SPK. SETTING
equipped with a digital
	DIGITAL AUDIO OUTPUT		STREAM/PCM
	DOWN MIX		Lo/Ro
input, this item must be set	COMPRESSION		ON
	DTS BASS MANAGEMENT		OFF
correctly.	AUTO STANDBY		OFF
	SCREEN SAVER		MODE1
	AV COMPULINK MODE		DVD1
	SELECT	KEY

•PCM ONLY

Should be selected when you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.

56