Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel of the unit if available.
English
Turning on/off the unit
Press DVD STANDBY/ON 
on the remote control unit or press STANDBY/ON 
on the front panel.
|
|
| TV | DVD |
| STANDBY/ON |
|
|
| |
|
|
|
|
| STANDBY/ON | OPEN/CLOSE |
|
| ||
OPEN |
| STANDBY/ON |
|
|
|
|
| |||
|
|
|
| STANDBY/ON | 0 |
|
| |||
/CLOSE |
| TV | DVD |
| DVD STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
|
| 7 | 3 | 8 | |
|
|
|
|
|
|
| DVD AUDIO PROGRESSIVE | 4 SKIP ¢ STOP | PLAY | PAUSE |
REPEAT | 3D | TV/VIDEO |
|
|
|
|
|
|
| |
PHONIC | CANCEL | RETURN |
|
|
|
|
| DVD/VIDEO CD/CD | ||
TV1 | TV2 | TV3 |
|
|
|
|
|
|
| |
1 | 2 | 3 |
|
|
|
|
|
|
| |
TV4 | TV5 | TV6 |
|
|
|
|
|
|
| |
4 |
| 5 | 6 |
|
|
|
|
|
|
|
TV7 | TV8 | TV9 |
|
|
|
|
|
|
| |
7 |
| 8 | 9 |
|
|
|
|
|
|
|
TV | TV0 | MUTING |
|
|
|
|
|
|
| |
10 0 +10
• You can turn on the unit by pressing the 3 button. In this case, the unit starts playback if the disc is set in the disc tray.
• If no disc is set, “NO DISC” appears on the display window.
• You can turn on the unit by pressing the 0 (OPEN/CLOSE) button on the front panel. In this case, the disc tray opens.
NOTE
•Even if you press the DVD STANDBY/ON 
or STANDBY/ON 
button to turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small amount of power.
Inserting and removing discs
1 Press0 (OPEN/CLOSE) to open the disc tray. 2 Place the disc in the tray.
With the label side up
Basic operations
|
| ER |
| D/CD | PLAY |
0 | DV |
|
|
|
8
0 | 3 |
¢7
4
•To insert an
3 Press 0 (OPEN/CLOSE) to close the disc tray.
The unit reads the disc information and the corresponding opening display (depending on the disc type) appears on the TV screen (See page 10).
NOTES
•Do not load a
•When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, or the disc may not be removed from the unit.
•Do not use any stabilizer when playing back a disc.
•With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.
•If you insert a DVD VIDEO disc whose region code does not match the unit, “REGION CODE ERROR!” is shown in the DVD opening display. For detail about the region code, see page 14.
25