JVC LPT1100-001A manual Skip Search Resume Function, Jump Search, One Touch Replay

24 EN BASIC OPERATIONS ON DVD DECK

Skip Search									Resume Function
During playback, press v.									It is possible to memorise the position where you stop playback
● Each press initiates an approximately 30-second period of fast-									and resume playback from that position.
motion playback. Normal playback resumes automatically.									● Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
● Skip search cannot be performed when a VCD/SVCD disc is										(A pg. 72)
being played back with the PBC function.									● Resume function always works for DVD-R/DVD-RW discs that
One Touch Replay										have not been finalised and DVD-RAM regardless of the setting
										of ARESUMEB.
									1 Press o during playback to memorise a resume point.
										● The unit enters Resume Stop mode and memorises the
										position where you have stopped playback as a resume point.
										(The inside of the disc status indicator on the front display panel
You can move back the playback position slightly.
										blinks while memorising.)
Press w.
										● The unit retains a memory of the resume points of the last 30
● Each press skips back for approximately 7 seconds and resumes
										discs played back, even though they have been ejected if
playback.
										ARESUMEB is set to ADISC RESUMEB. (A pg. 72)
● Pressing while paused skips back for approximately 7 seconds
										● Performing the following steps would erase the resume points:
and resumes pause.
										(The inside of the disc status indicator stops blinking and lights.)
Jump Search
										When ARESUMEB is set to AONB:
										• Press A to turn off the unit.
										• Press M to take out the disc.
										• Press o in stop mode.
										• Press TOP MENU to display the top menu, then start playback by
You can locate a scene ahead or behind the current one by
										selecting an item, etc.
jumping scenes according to selected time intervals (A pg. 73)										• Press MENU to display the disc menu, then start playback by
during playback (or Live Memory Playback).										selecting an item, etc.
Press JUMP – or JUMP +.										When ARESUMEB is set to ADISC RESUMEB:
● To advance forward or back, press JUMP – or JUMP +										• Set ARESUMEB to AOFFB. (A pg. 72)
repeatedly within 5 seconds of each press to continue jump.										• Press o in stop mode.
● Depending on the time from where you want to start jump search,										• Press TOP MENU to display the top menu, then start playback by
the first press of JUMP – or JUMP + will not necessarily lead to a										selecting an item, etc.
jump of the selected time interval. The first press will lead to a										• Press MENU to display the disc menu, then start playback by
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45										selecting an item, etc.
min/ 00 min). The subsequent jumps will then be in accordance									2 Press I in stop mode to resume playback. The unit starts
to the selected time interval.										playback from the resume point.
● When you cannot advance any further (beginning or end of									NOTES:
programme reached), the message AUNABLE TO GO BACK
									● ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
ANY MOREB appears on the screen and the on-air screen
										already finalised DVD-R/DVD-RW (video mode) discs. For other
resumes. In such a case, press S, O or o.
										types of discs, the function under AONB setting will be applied
Example:
										even if ARESUMEB is set to ADISC RESUMEB. (A pg. 72)
Playback search when jump interval is set to 15 MIN jumps.									● If you stop the playback of a disc for which a resume point has
Taking for instance, you want to start jump search 40 minutes after										already been memorised, the memory will be updated with the
the beginning of the programme. Pressing JUMP – or JUMP + will										new resume point.
result in a jump to the scene at the 30 minutes point or 45 minutes									● After the unit has memorised the resume points for 30 discs,
point respectively as illustrated below. At the subsequent press, the										remembering a new resume point will cause the unit to delete the
scene will jump to the 15 minutes point or 1 hour point respectively,										oldest memorised point. Stopping playback of a disc for which a
according to the selected time interval, which in this case is A15 MINB.										resume point is already stored may change the order in which the
Time counter										points are stored. This may potentially change the order in which
										points are deleted.
0 min				40 min				1 h 15 min
		30 min							● When the unit memorises a resume point for a disc, it also
	15 min				45 min	1 h
										remembers audio language, subtitle and angle settings.
									● This function may not work for some Video CD/SVCDs.
									● When ARESUMEB is changed to AONB or AOFFB (A pg. 72),
Beginning of programme			Current scene				End of programme
										resume points of the discs memorised with ARESUMEB set to

NOTE:	ADISC RESUMEB will be cleared.
	● Resume points are memorised for each side of a double-sided
Jump search cannot be performed with finalised DVD-R/DVD-RW
	disc.
(video mode) discs.
	● When you switch to HDD while playing back JPEG/MP3 files,
	playback stops. The Resume Function doesn’t work when you
	switch to DVD thereafter to playback the disc.