82 EN TROUBLESHOOTING
Playback (DV Deck)
The DV deck cannot be operated.
●The DV deck is not selected.
] Press DV/HDD/DVD SELECT on the unit repeatedly or DV on the remote control so that the DV lamp lights up on the unit.
The tape will not rewind or
●The tape is already fully rewound or
The playback picture does not appear while the tape is running.
●The TV is not set to the AV mode. ] Set the TV to the AV mode.
Noise appears during visual search.
●This is normal.
The playback picture is blurred or interrupted while TV broadcasts are clear or AUSE CLEANING CASSETTEB message appears on the screen.
●The video heads may be dirty.
] Use a dry cleaning cassette
Recording (DVD Deck)
The desired programme cannot be recorded.
●The channel position does not correspond to that in the receiving area.
] Set the correct channel position for the receiving broadcast. (A pg. 74)
Recording cannot be made.
●No disc or a disc not being compatible with the unit is loaded. ] Load a recordable disc on the unit. (A pg. 5)
●The disc loaded is not formatted.
] Format the disc. (A pg. 78)
●A finalised
] Recording cannot be made on finalised discs. Load a recordable disc on the unit.
●The disc is full or does not have enough space for the title to be recorded.
] Clear unnecessary titles on the disc or load a blank disc. (A pg. 51)
●The
] Release the protect tab. (A pg. 8)
Recording (HDD Deck)
TV broadcasts cannot be recorded.
●
Camcorder recording is not possible.
●The camcorder has not been properly connected. ] Confirm that the camcorder is properly connected.
●The input mode is not correct.
] Set the input mode to
Recording (DV Deck)
During recording, the tape does not run. The DV recording lamp lights up on the unit.
●The unit is in the Record Pause mode. ] Press I to resume recording.
Recording cannot be done.
●There is no cassette loaded, or the cassette loaded has had its erase protection switch set to ASAVEB.
] Insert a Mini DV cassette, or set the erase protection switch set to ARECB.
●An attempt has been made to record from this unit’s
] It is not possible to record from this unit’s
If you want to record on a DV tape, record by connecting the output of the external equipment such as a satellite receiver to this unit’s external input
Camcorder recording is not possible.
●The camcorder has not been properly connected. ] Confirm that the camcorder is properly connected.
●The input mode is not correct.
] Set the input mode to
The tape is automatically rewound, then the unit is shut off.
●The end of the tape was reached during recording.
] The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.
Audio dubbing is not possible.
●ADV AUDIO RECB had been set to A16BITB at the original
recording.
] Set ADV AUDIO RECB to A12BITB at the original recording.
●The tape speed had been set to LP at the original recording. ] Set the tape speed to SP at the original recording.
Monitoring the audio dubbed sound is not possible during audio dubbing.
] This is normal. Monitor the sound using the connected devices.