JVC LPT1100-001A manual When using your unit as the source player

62 EN EDITING

	Edit To Or From Another Recorder		● Slide the TV/CABLE/SAT/DVD switch to DVD.
			1 Connect another recorder’s 21-pin SCART connector to the
You can use your unit as the source player or as the recording
			unit’s 21-pin SCART connector as illustrated.
deck.
			A When using your unit as the source player:
			^ connect its [L-1IN/OUT] connector to the recording deck.
NOTES:
			B When using your unit as the recording deck:
● When using another recorder as the recording deck, refer to its
			^ connect its [L-2IN/DECODER] connector to the source
		instruction manual.
			player.
● It is not possible to dub copy-protected contents. An error
			● If another recorder is compatible with the Y/C signal:
		message will appear on the TV screen.
			^ when using your unit as the source player, set AL-1
			OUTPUTB to ASCART S-VIDEOB. (A pg. 63)

A When using your unit as the source player	^ when using your unit as the recording deck, set AL-2
	SELECTB to AS-VIDEOB. (A pg. 63)

TV	Player	Your unit
		21-pin SCART cable
		(supplied)
21-pin SCART cable
	(not supplied)
		Another recorder
	Recorder

BWhen using your unit as the recording deck

TV	Recorder	Your unit
		21-pin SCART
		cable (supplied)
21-pin SCART cable
	(not supplied)

2When using this unit as the recording deck, press DV/HDD/ DVD SELECT on the unit repeatedly to select the recording deck.

3When using this unit as the recording deck, press PR +/– to select AL-2B.

●Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 63)

4When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode. For DV deck, press REC MODE on the remote control to set the recording mode.

5Engage the Play mode of the source player.

6Engage the Record mode of the recording deck.

7Stop recording on the recording deck, then stop playback on the source player.

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 73) If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this unit’s [S-VIDEO] and [AUDIO] input connectors on the front panel. Then, set the unit’s input mode to AF-1B in step 3, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 64)

Another recorder

Player