JVC LPT1100-001A manual Clock Set

		SUBSIDIARY SETTINGS EN 77
Clock Set		6 Press selection keys to select ATV PROGRAMMEB, then press
		ENTER. Press selection keys to set the channel position to the
		number representing the station transmitting clock setting data,
		then press ENTER.
IMPORTANT:		● The unit is preset to receive clock setting and adjustment data
If you performed Auto Set Up (A pg. 17) or Preset Download		from channel position 1.
(A pg. 18), without ever having set the clock previously, the		7 Press SET UP to start the clock operation.
unit’s built-in clock is also set automatically.		NOTES:
Perform the following steps only if ^
		● Just Clock (when set to AONB) adjusts the unit’s built-in clock
^ Auto Clock Set has not been performed correctly by Auto Set
		every hour, except for 23:00, 0:00, 1:00 and 2:00.
Up or Preset Download.
		● Just Clock is not effective when:
OR
		^ the unit’s power is on.
^ you want to change Just Clock setting. (See AJust ClockB in		^ the unit is in the Timer mode.
the right column)		^ a difference of more than 3 minutes exists between the built-in
		clock’s time and the actual time.
● Turn on the unit.		^ the unit is in the Automatic Satellite Programme Recording
		mode. (A pg. 48) (HDD deck only)
● Turn on the TV and select the AV mode.
		^ the unit is in the Power Save mode. (A pg. 73)
● Slide the TV/CABLE/SAT/DVD switch to DVD.
		^ AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB.
		(A pg. 63)
CABLE/SAT		● If Just Clock is set to AONB, the unit’s clock is automatically
TV	DVD	adjusted at the start/end of Summer Time.
		● Just Clock may not function properly depending on the reception
		condition.
		Just Clock
		The Just Clock function provides accurate time keeping through
		automatic adjustments at regular intervals, by reading data from a
		PDC signal.
ENTER		The Just Clock option can be set to AONB or AOFFB at the Clock Set
		screen (the default setting is AOFFB).
Selection Keys		IMPORTANT:
FGDE
		If you turn off Just Clock, the accuracy of your unit’s built-in clock
		may be reduced, which could adversely affect timer recording. We
		recommend you to keep Just Clock on. In cases where the clock
		setting data from a PDC signal is incorrect, however, you are
		advised to keep Just Clock set to AOFFB.
SET UP

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press

G.

3Press selection keys to select ACLOCK SETB, then press G.

NOTE:

When you have selected

AMAGYARORSZÁGB, AČESKÁ REPUBLIKAB, APOLSKAB or AOTHER EASTERNB for the country setting (A pg. 17), you cannot use Just Clock function. Skip steps 5 and 6.

DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP INITIAL SET UP

TUNER SET		CLOCK SET
YEAR		2004
DATE		01. 01 THU
TIME		--:--
JUST CLOCK		OFF
TV PROGRAMME		1
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

4Press selection keys to select AYEARB, then press ENTER. Press selection keys to set the year, then press ENTER.

●Repeat the same procedure to set the date and time.

●When you set the date, press and hold FG to change the date by 15-day intervals.

●When you set the time, press and hold FG to change the time by 30-minute intervals.

5Press selection keys to select AJUST CLOCKB, then press ENTER. Press selection keys to set to the desired mode, then press ENTER.

●The default setting is AOFFB.

●For the Just clock function, refer to AJust ClockB on the right column.

●If you set to AOFFB, you can disregard the next step as you won’t be able to receive regular clock adjustments.