JVC LPT1100-001A manual Howv IEW Timer Programming

44 EN TIMER RECORDING ON HDD/DVD DECK

SHOWVIEW Timer Programming			7 The SHOWVIEW number you entered and the matching timer
			recording information are displayed on the TV screen. Check
You can programme this unit to timer record as many as 16			the programme data.
			● To cancel this setting, press RETURN.
programmes.
With the SHOWVIEW system, timer programming is greatly			IMPORTANT:
simplified because each TV programme has a corresponding code
			Make sure the channel position number you wish to record is
number which your unit is able to recognise.
			displayed; if not, see ASHOWVIEW System SetupB (A pg. 74) and
You can use the remote control to enter the SHOWVIEW number.
			set the Guide Programme number correctly.
● Make sure that the unit’s built-in clock is set properly.			8 Press selection keys to select the desired recording option as
● Turn on the unit.
			required. Press selection keys to select the desired setting,
● Turn on the TV and select the AV mode.
			then press ENTER.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
			● AINPUT TITLEB (A pg. 50, AModify Title NameB)
			● ACATEGORYB (A pg. 51, AModify CategoryB)
	CABLE/SAT		● AVPS/PDCB (A pg. 45, AVPS/PDC RecordingB)
	TV	DVD	● AWEEKLY/DAILYB (A pg. 45, AWeekly/Daily RecordingB)
			● AREC MODEB (A pg. 32, ARecording ModeB)
			9 Press selection keys to select AOKB, then press ENTER to
			access the Programme Confirmation screen.
0 – 9			10 Press selection keys to select AEXITB, then press ENTER to
			complete timer programming.
			● To programme another timer, press selection keys to select
	PROGRAMME		ACONTINUEB, then press ENTER.
ENTER			● If APROGRAMME OVERLAPPEDB appears on the TV screen,
	Selection Keys		delete or modify the programmes.
	FGDE		NOTES:
	RETURN
			● There may be cases that the SHOWVIEW Timer Programming
			function prolongs the stop time of the programming.
			● When two successive programmes are recorded on a DVD-RW
			disc with the SHOWVIEW Timer Programming function, the
			beginning of the second one may be left off the recording.
DISPLAY			● If the copy limited programme is received during timer recording,
			the unit enters Record Pause mode. Recording starts again if it is
VPS/PDCj			switched to a recordable broadcast during the time you
			programmed.
			IMPORTANT:
1 Load a recordable disc if recording to DVD.			If you have moved to a different area or if a broadcasting
			station’s channel number has been changed, the wrong channel
2 Press PROGRAMME to access the programme top screen.
			number will be displayed on the SHOWVIEW programme screen
3 Press selection keys to select ASHOWVIEWB, then press			in step 7. When this happens, set the correct Guide Programme
ENTER.			number for that station. (A pg. 74, ASHOWVIEW System SetupB)

●When APROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMESB appears on the TV screen, you need to cancel some of the reserved programmes. (A pg. 47)

4 Press the number keys to

enter the SHOWVIEW number			123 PROGRAMME > SHOWVIEW (1/2)
of a programme you wish to						SHOWVIEW NO.
					1 2 3 4
record.
	SELECT WITH @					1	2	3
OR	THEN PRESS [ENTER]					4	5	6
	PRESS [PROGRAMME]
Press selection keys to select	TO EXIT					7	8	9
					DELETE		0	DELETE ALL
the desired number key on the
	PROGRAMME	ENTER		RECORD TO					DVD
screen, then press ENTER.
	EXIT	SELECT						CONFIRM

Repeat to enter all required numbers.

●If you have made a mistake, press selection keys to select

ADELETEB or ADELETE ALLB, then press ENTER and input the correct number before you press ENTER again.

5Press selection keys to select ARECORD TOB, then press ENTER. Press selection keys to select the desired recording deck, then press ENTER.

6Press selection keys to select ACONFIRMB, then press

ENTER.

●If the number you entered is invalid, ASHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV screen. Input a valid SHOWVIEW number.

●If AGUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAMME THEN RETRYB appears on the TV screen, set Guide Programme Numbers manually. (A pg. 74)