|
| SUBSIDIARY SETTINGS EN 73 | ||
|
|
|
| |
8 INPUT COLOUR SYSTEM ^ PAL / SECAM | 8 ON SCREEN LANGUAGE | |||
You can play back PAL discs, or record PAL and SECAM signals on | This unit offers you the choice to view | |||
this unit. Select the appropriate colour system. | different languages. Although Auto Set Up selects the language | |||
PAL: | automatically (A pg. 19), you can change the language setting | |||
To record PAL signals. | manually as required. | |||
For details, refer to | ||||
SECAM: | ||||
|
|
| ||
To record SECAM signals. |
|
|
| |
|
|
|
| |
8 JUMP TIME ^ 15 MIN / 30 MIN / 1 HR |
|
|
| |
You can locate a scene ahead of or behind the currently viewed |
|
|
| |
one by jumping a selected time interval during playback (or Live |
|
|
| |
Memory Playback). For details, refer to AJump SearchB (A pg. 24, |
|
|
| |
38). |
|
|
| |
DISPLAY SET
8SUPERIMPOSE ^ AUTO / OFF
When this function is set to AAUTOB, various operational indicators appear on the TV screen. Messages appear in the selected language. (A pg. 20)
AUTO:
To superimpose operational indications for approximately five seconds just after the corresponding operation.
OFF:
To turn off superimposed indications.
NOTES:
●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 62)
●When you select AAUTOB, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.
8BLUE BACK ^ OFF / ON
When this function is set to AONB, the TV screen becomes all blue when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set this function to AOFFB.
8DIMMER ^ BRIGHT / DIMMED
You can change the brightness of the front display panel.
BRIGHT:
Normally select this.
DIMMED:
To dim the front display panel. (Blue lamp on the front display panel is turned off.)
8POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power consumption while the unit is turned off.
NOTES:
●During Power Save mode ^
^the front display panel will be turned off.
^the Just Clock function (A pg. 77) does not work.
●Power Save does not work when ^
^the unit is in the Timer mode.
^the unit’s power is turned off after timer recording or Instant Timer Recording.
^the Automatic Satellite Programme Recording mode is engaged. (A pg. 48)
^
●It takes some time for the unit to complete initialisation after you turn on the unit power, with AWAKE UPB blinking on the front display panel.