JVC LPT1100-001A manual Time Search, Simulated Surround Effect, Adjusting The Picture Quality

BASIC OPERATIONS ON DVD DECK EN 29

CABLE/SAT

TV DVD

0-9

CANCEL

ENTER	Selection Keys
	FGDE

RETURN

S T

I

CLEAR

ON SCREEN

Time Search

You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a programme (DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/SVCD and Audio CD).

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select Aj9B, then press ENTER. The pop-up window appears under the selected item.

TITLE 99 CHAPTER 99 EACH 0:00

Simulated Surround Effect

It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2- channel stereo system.

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select A B, then press ENTER.

●A3D-ONB appears above the selected item and Simulated Surround Effect is activated.

●Each time you press ENTER, A3D-ONB appears and disappears alternately.

TITLE 99	CHAPTER 99	EACH 0:00
DVD-			3D-ON	CINEMA AUTO

VIDEO

To clear the on-screen bar

Press ON SCREEN.

To cancel the simulated surround effect

Press ENTER to clear A3D-ONB from the screen.

NOTES:

●Simulated Surround Effect works correctly only when playing back a title recorded in multichannels.

●Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the [DIGITAL AUDIO OUT] connectors.

●When Simulated Surround Effect is activated, the settings of AANALOG AUDIO OUTB and AD. RANGE CONTROLB are disabled. (A pg. 71)

●Simulated Surround Effect cannot be activated under the following conditions:

●When the HDD deck is in the recording mode.

●When the HDD or DVD deck is in the timer standby mode.

●When a disc containing both the Dolby Digital 5.1CH and 2CH sound formats is playing back a scene that is not in the 5.1CH sound format.

DVD-	CINEMA AUTO
VIDEO

3Press the number keys to enter the time, then press ENTER. Playback starts from the specified time.

Example:

To play back from a point 12 (minutes): 50 (seconds) elapsed.

TIME TIME

Adjusting The Picture Quality

You can obtain optimal picture quality by selecting an appropriate picture mode.

1Press ON SCREEN twice to access the on-screen bar.

2 Press selection keys to select AB, then press ENTER. The pop-up window appears under the selected item.

	Press 1		Press 2	TITLE 99	CHAPTER 99	EACH 0:00
TIME		TIME

Press 5	Press 0	DVD-	CINEMA	AUTO
TIME		VIDEO

If you have specified a wrong selection,

Press RETURN on the remote control and repeat the above procedures from step 2.

To clear the on-screen bar

Press ON SCREEN.

NOTES:

●When A7B is displayed on the TV screen in step 3, you have selected a point that exceeds the recording time of the disc.

●Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, A7B is displayed on the TV screen as well.

●This function is not possible for a Video CD/SVCD with PBC function.

3Press selection keys to select the desired option, then press

ENTER.

NORMAL:

Normally select this option.

CINEMA:

Suitable for a movie disc, etc.

SHARP:

Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons.

SOFT:

Select this option when too much noise appears.

To clear the on-screen bar

Press ON SCREEN.