JVC VR601 instruction manual Alarm Recording, Externally triggered Recording

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK / TIMER PAGE

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK / TIMER PAGE

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARMsettings, please refer to section 5.2 for more details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select ALARM and press the Enter button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.

CLOCK / TIMER

CLOCK	: SET
REC ENABLE	: OFF
	: SET
TIMER

MAIN PAGE

SET REC SCHEDULE

CLOCK / TIMER

CLOCK		: SET
		: OFF
	REC ENABLE
	TIMER	: SET

MAIN PAGE

TIMER REC ENABLE

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION	: OFF
REC RATE	: 20F/S
REC QUALITY	: BEST
AUDIO	: OFF
ALM TYPE	: NO
ALM DURATION	: 0 SEC
PRE- ALARM	: OFF
MAIN PAGE
ALARM REC ENABLE

REC SCHEDULE

	START END			START END
S :	00:00-00:00		00:00-00:00
M:	00:00-00:00		00:00-00:00
T : 00:00-00:00			00:00-00:00
W: 00:00-00:00			00:00-00:00
T : 00:00-00:00			00:00-00:00
F : 00:00-00:00			00:00-00:00
S : 00:00-00:00			00:00-00:00
					CANCEL
		OK
		TO MOVE			TO CHANGE

4.2.4 Externally triggered Recording

By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”. Please refer to section 2.3 for more details.

* About the location of the buttons, please refer to Page 10 2.1 Front View.

26 27