JVC VR601 instruction manual Menu Backgnd SD Setup, Mac, Bios, Date

MENU BACKGND:		SD SETUP:
There are 3 levels of background color transparency, you can choose from : level 1 is totally		The VR-601 offers a quick setup method by using a SD card. If the user wants to set up many a
transparent, level 3 is opaque, and level 2 is between level 1 and 3. The background color is used		number of the same devices with the same settings, he can save the whole settings to a SD card,
in setup menu and search function.		then transfer to another DVR.
		SAVE: Saves the whole setting to the SD card.
BUZZER:		LOAD: Loads the whole setting from the SD card.
This option determines the embedded buzzer sounding a tone to signal the following situations. A		ʳ
tone lasts about two seconds long.		VERSION:
ON: Enables buzzer.		This item is in the setup menu reveal network MAC, BIOS version, and software version, and last
OFF: Disables buzzer.		updated date.
	Situation
	Alarm occurs
	Video loss occurs		MAC	: 00 : 0c : 0c : 00 : 00 : 07
	Disk is full
			BIOS	: 1.05
	Load factory default
			SW	: 1.00J
	Buzzer set to ON		DATE	: Jun 9 2003
	Enable/disable key lock function
	Power on /off mobile rack HDD
	Backup operation complete
	Timer activate/deactivate
	Recording switching between HDD
PASSWORD:
This option allows you to set a password to prevent any unauthorized re-formatting of the
hard-disk drives or use by a network viewer. The standard password is “9999”.
OLD PASSWORD: Enter the pre-set password (or the standard password if this is the initial
	setting) to access the password setting system.
NEW PASSWORD: Enter a 4-digit-number password of your choosing which will replace
	the pre-set password (or the standard password “9999”).
SETUP PWD:
When this option is on, user must pass the password check before entering the setup menu.
ON: Enables it.
OFF: Disables it.
DEFAULT:
This option allows you to reload the factory default setting. Please do note that the password can
not be changed in the factory default setting.

50 51