JVC VR601 Clock / Timer, Communication, NET Enable OFF NET Dhcp NET IP SET FTP Setting Main

5.3 CLOCK / TIMER

The DVR provides a weekly table, consisting of two periods of time each day for scheduled recording. This option allows you to set the time each day that the DVR will start and stop recording.

5.4 COMMUNICATION

This option allows you to configure the status of the RS-232 communication port when connected to an external device, and the Ethernet communications settings. (Please refer to the RS-232 Protocol and Network Function for more details)

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO TIMER PAGE

CLOCK:

This entry allows users to set the system time.

CLOCK / TIMER
CLOCK	: SET
	: OFF
REC ENABLE
TIMER	: SET
MAIN PAGE
TIMER REC ENABLE

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO COMM PAGE

COMM SETTING

COMM ID	: 01
RS232	: ON
RS485	: ON
NET ENABLE	: OFF
NET DHCP	: OFF
NET IP	: SET
FTP SETTING

MAIN PAGE

SET RS232 / RS485 ID

NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up (Operate On mode).

REC ENABLE:

This option enables/disables the programmed scheduled recording.

ON: Enables the scheduled recording.

OFF: Disables the scheduled recording.

TIMER:

This entry allows users to program the time each day that the DVR will start and stop recording. There are two time periods each day available for scheduling. The time is displayed in a 24-hour clock format. If there is a time overlapping showing between two continual time period settings, the device will automatically combine the two time-period settings into one combined time-period setting.

REC SCHEDULE		REC SCHEDULE
START END	START END	START END	START END
S :06:00-16:00	12:00-18:00	S :06:00-18:00	00:00-00:00

COMM ID:

Communication ID for RS-232 and RS-485 communication. After the VR-601 receives a RS-232 or RS-485 command, it checks if the <Dest ID> within the code is the same as the COMM ID, in which case the particular command can be accept.

RS-232:

The RS-232 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-232 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-232 communication port.

RS-485:

The RS-485 communication port can be either in an importing or exporting mode according to your applications.

ON: Enables the RS-485 communication port. When you wish the unit to be controlled by an external device, please select this entry for use.

OFF: Disables the RS-485 communication port.

NET ENABLE:

This option selects either enable or disable for the Ethernet communication port. OFF:Disables it.

ON: Enables it.

44 45