JVC VR601 Menu Setup, Key Lock Operation, Transfer the system setting info of DVR to another

Transfer the system setting info of DVR to another:

zInsert the SD card which has stored the system setting info into the DVR.

zPress the Setup button to enter the setup mode and select the SYSTEM.

zHighlight SYSTEM and press the Enter button to enter the SYSTEM SETTING page.

zThen set SD SETUP to LOAD.

5. MENU SETUP

There are 6 categories for operation setting in the setup menu system as shown below. The following sections will instruct you step by step to configure the operation setting and state each menu’s purpose and

options. Press the Setup button to access the setup menu. Once inside the menu system, the on-screen menu allows you to set up the key features of the unit. The functions of various buttons within the menu-setup mode are described in the paragraphs below.

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO SYSTEM SETTING

SYSTEM

OPERATION LOG	: ENTER
MENU BACKGND	: 2
BUZZER	: ON
PASSWORD	: SET
SETUP PWD	: OFF
DEFAULT	: LOAD
SD SETUP	: SAVE
VERSION	: ENTER
MAIN PAGE
VIEW OPERATION LOG

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

3.Updating System Software (Please refer to section 3.4 for more details.)

4.6Key Lock Operation

The Key lock operation protects the unit against unauthorized use by disabling the entire front panel controls. Simultaneously press these two “<” and “>” buttons (as shown below) for at least 3 seconds to lock the unit; to release the Key Lock, simultaneously press these two buttons again.

PLAY	STOP
PAUSE	REC
REV	FWD

Operate Display	Setup	Search	Enter	Monitor	A-rec
					T-rec
					DISK	OPERATE

11 14

* About the location of the buttons, please refer to Page 10 2.1 Front View.

KEY FUNCTIONS
Setup button	:
Press to enter the setup menu. Press again to exit the setup mode.
“^” “v” buttons	and	:
Press to select the desired item or entry for setting.
“<” “>” buttons	and	:
Press to highlight the desired option or to select the context for setting.
Enter button	:

Press to enter the selected item and to save the setting.

Shuttle Ring :

Turn to highlight the desired option or to select the context for setting.

Jog Dial :

Turn to select the desired item or entry for setting.

* About the location of the buttons, please refer to Page 10 2.1 Front View.

38 39