JVC VR601 instruction manual Safety Precautions for USA and Canada, Avertissement

Page 2

IMPORTANT SAFEGUARDS

SAFETY PRECAUTIONS (FOR USA AND CANADA)

1.Read all of these instructions.

2.Save these instructions for later use.

3.All warnings on the product and in the operating instructions should be adhered to.

4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.Do not use this appliance near water “ for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

7.Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance.

Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.

Wall or shelf mounting should follow the manufacturer instructions, and should use a mounting kit approved by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

8.Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the appliance and to protect it from

overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.

10.This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

12.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.

13.Follow all warnings and instructions marked on the appliance.

14.Do not overload wall outlets and extension cords as this can result in fire or electric shock.

15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

16.Do not attempt to service this appliance yourself as opening or removing covers may touch dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the appliance.

c.If the appliance has been exposed to rain or water.

d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e.If the appliance has been dropped or the cabinet has been damaged.

f . When the appliance exhibits a distinct change in performance this indicates a need for service.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This unit should be used with 120V AC only.

CAUTION:

To prevent electric shocks and fire hazards, DO NOT use any other power.

NOTE:

The rating plate (serial number plate) is on the rear of the unit.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CAUTION

CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

CAUTION

Risk of explosion if replaced by an incorrect type. Dispose of used batteries according to the instructions.

.

Le symbole de l’ éclair a l’ interieur d’ un triangle equilateral est destine a alerter l’ utilisateur sur la presence d’ une tension dangereuse non isolee dans le boitier duprodult. Cette tension est sufflsante pour provoquer l’ electrocution de personnes

Le point d’ exclamation a l’linterieur d’ un triangle equilateral est destine a alerter l’ utilisateur sur la presence d’ openations d’ entretien importantes au sujet desquelles des renseignements se trouvent dand le manuel d’ instructions.

Ces symbols ne sont utilizes qu’aux Etats-Unis.

AVERTISSEMENT:

POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A L’HUMIDITE OU A LA PLUIE.

Ce magnetoscope ne doit etre utilize que sur du courant alternatif en 120V.

ATTENTION:

Afin d’eviter tout resque d’incendie ou d’electrocution, ne pas utiliser d’aufres sources d’alimentation electrique.

REMARQUE:

La plaque d’identification (numero de serie) se trouve dur le pammeau arriere de l’appareil.

WARNING:

The battery used in the VR-601U must be replaced by a JVC authorized service dealer only.

WARNING:

The installation of this equipment should be made by a qualified service person and should conform to all local codes.

Cet appareil numerique de la Classe A respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada.

2

3

Image 2
Contents Digital Video Recorder Safety Precautions for USA and Canada AvertissementSafety Precautions for Europe and Australia Power SystemTable Of Contents Product Introduction Product FeaturesProduct Features Description of the FRONT/REAR View Front ViewNo Connection Rear View Alarm In/OutʽTHIS Figure is Looked from the Rear Connecting with a Multiplexer InstallationConnecting with a Single Camera Basic ConnectionClock SET Connecting with a QuadAttaching AN External Device to DVR IDE Hard-Disk Drive InstallationSystem Information Quality Best Ntsc Rate 6 HRUpdating System Software Configuring Recording SettingsBasic Operations Ntsc MUX onPAL MUX OFF Audio OFFPAL MUX on Manual Recording Timer RecordingRecording Operations Alarm Recording Externally triggered RecordingREC Stop Play Playback OperationsFast Forward/Reverse Play Back Recorded Video from a HDD of the mobile rack Search OperationsSlow Forward/Reverse Full List SearchTime Search Alarm list SearchThumbnail Search SD Card Search Backup OperationsMobile Rack HD Backup Disk Setting Reformat HD2 Usage Secure Digital Card SD Card BackupAlarm Select Main Backup Alarm to HD2 Save to J0000.JPGKey Lock Operation Menu SetupTransfer the system setting info of DVR to another KEY FunctionsPRE- Alarm OFF Main Alarm REC Enable REC Quality REC SettingAlarm Setting REC Quality Best Disk FullPRE- Alarm NET Enable Clock / TimerNET Enable OFF NET Dhcp NET IP SET FTP Setting Main CommunicationREC Mode Alarm REC Comm Setting FTP Setting Comm IDEnable REC ModeHD 1 Disk Setting SystemMain Menu Record Disk Setting MAC Menu Backgnd SD SetupBios DateCommunication Protocol SetupRS-232 & RS-485 Protocol DEC HEXMobile Rack Installation Page System Default SET RS232 / RS485D Message Meanings S.D MessageNetwork Viewer and Image Viewer Network ViewerURL of a Proxy CancelView the VR-601 video from a remote PC PortFunction Buttons Description Viewing images View all the connected devicesView single device Set the Alarm record settings Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the record timerImage Viewer Archive Images to the ComputerNetwork Configuration Index TableConfigure Your DVR Network Settings RJ-45 PIN configuration for LAN HubEnable Dhcp Function Enable DVR Network Function12.3 TCP/IP Communication Software Connection Testing 12.4 TCP/IP installation12.5 TCP/IP Configuration setting Click Start Æ Settings Æ Control Panel Æ NetworkModel Number VR-601 U VR-601 E SpecificationsDesign and specifications subject to change without notice Colors Compatible MultiplexersManufacturer Model Channel Decode onPrecautions