JVC VR601 instruction manual Description of the FRONT/REAR View, Front View

2. DESCRIPTION OF THE FRONT/REAR VIEW

2.1 Front View

	1								23	2	24	3	4	5	6
													PLAY	STOP
													PAUSE	REC
												REV			FWD
Operate	Display	Setup	Search					Enter	Monitor	A-rec
										T-rec
												DISK			OPERATE
7	8	9	10	11	14	13	12	15	16	17	18	19	20	21	22

Hard-disk drive compartment.

The compartment allows you to install a hard-disk drive mostly for backup purposes. Make sure the drive is well secured with the mounting screws in the mobile rack before you put the rack into the compartment. And remember to turn on the power of the compartment by locking it.

Hard-disk compartment lock:

The key lock secures a hard-disk in place. Unlock the compartment before you remove the hard-disk from the slot without turning off the device.

PAUSE button:

In a playback display, press this to freeze the display. During the freeze, press to display one frame/field of a picture at a time in the forward direction. (Illuminate green in PAUSE mode.) PLAY button:

Press to play back a recorded video from the hard-disk. (Illuminate green in PLAY mode.) STOP button:

Press to stop playing back a recorded video or recording video into a hard-disk. (Illuminate green in STOP mode.)

REC button:

Press to start recording video into a hard-disk while in the live display mode.(Illuminate red in REC mode.)

OPERATE button:

Press this button for at least 3 seconds to power off. Press again to activate the device. DISPLAY button:

Press to show the system operation status on the screen. Setup button:

Press this to enter the setup menu. Press again to exit the setup mode.

Search button:

Press to enter the search mode to access recorded video. Left / Right buttons:

Press the two buttons to highlight desired items in the menu setup mode. For Key Lock operation, press these two buttons simultaneously once; to disable Key Lock, press these two buttons simultaneously again.

Up / Down buttons:

Press these two buttons to select the desired contents for programming in the setup menu mode. Enter Button:

Press to enter a selected item and save the setting in the menu setup mode. Monitor button:

Press to switch between a multiplexer-decoded video and the encoded video to be displayed when connected with a multiplexer. When the button light is on it indicates the unit is displaying the decoded video.( The images are not multiplexing . ) In this mode, the unit doesn’t display the OSD message of the unit on the screen. However, this doesn’t affect the unit’s OSD message which is recorded into hard-disk drives. When the button light is off it indicates the unit is displaying encoded video. (The images switch swiftly).

T-rec Indicator:

This indicator of the timer recording mode lights up to signal the scheduled record setting is on.

A-rec Indicator:

This indicator of the alarm recording mode lights up to indicate the alarm record setting is on.

DISK Indicator:

The indicator shows the operation status of the unit’s hard-disk drives. The green light indicates the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up. The orange light indicates the hard-disk is retrieving data at disk-full status.

Shuttle Ring:

The shuttle can be moved forward and backward for playback in either direction. Turn this left to play a recorded video in the reverse direction at faster or slower speeds than the recorded speed. Turn this right to play a recorded video in the forward direction at faster or slower speeds than the recorded speed.

Jog Dial:

This dial can act in both a forward and a backward direction, as well as step by step. Turn this left to play a recorded video in the reverse direction. Turn this right to play a recorded video in the forward direction.

OPERATE Indicator:

Indicates the power status of the unit. The green light indicates the hard-disk drive is activating. The orange light signals the hard-disk drive is power stand by.

Mobile Rack Power LED:

Indicates the power status of the Mobile Rack. The green light indicates the Mobile Rack is activating.

Mobile Rack HDD LED:

Indicates the HDD status of the Mobile Rack. The orange light indicates the HDD is storing or retrieving data.

10 11