Hitachi 42PD7800 Installation Instructions, Anti-tumble measures, Securing to a wall or pillar

INSTALLATION INSTRUCTIONS

Installation

WARNING

Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.

CAUTION

• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches10cm or more* : For a desktop set-up) or more between the sides and other objects such as walls, etc.,

so that the ventilation holes are not blocked.(*)

Cord or chain

Wall or Pillar

Clamp

ENGLISH

Anti-tumble measures

CAUTION

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.

Securing to a wall or pillar

Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.

Cord or chain

Wall or Pillar

Hook Clamp

Cord or chain

Securing desktop

1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.

2)Using commercially available wood screws, secure the set firmly in position.

Wood screw

Two places

Read SAFETY INSTRUCTIONS ( 4 to 7 ) carefully to ensure maximum safety before pro- ceeding to these steps:

•Choose an appropriate site and install the product on a level table where the stand is secure.

•Install the monitor to have ready access to a power socket available.

•Make sure that the power switch of this device is turned off.

CAUTION

Loosen a cord or chain enough while operating power swivel to avoid possible physical injury.

13