OTHER FUNCTIONS (continued)
Audio Switching
A2 / NICAM / Sound Multiplex (TV mode)
•The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on right.
Press the CH I / II button to select the sound to be heard.
Each time the button is pressed, I, II or ▼ (force mono) appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received |
|
| Yellow | |||||
|
|
|
| Yellow | ||||
| [I] |
|
|
|
| [II] |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH
8
NICAM [II]
Green
NICAM signal received Yellow
NICAM [I]
Yellow | Green |
|
NICAM [II]
Select I, II or 
(force mono) to hear the CH I, CH II or MONO broadcast respectively.
STEREO sound broadcast
When a stereo program is received, sound mode display will appear in red, and you can press the CH I / II button to select between stereo and mono sound.
Each time the button is pressed, 
or ▼ (force mono) appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
8
Sound multiplex signal received
Red
Green
NICAM signal received
NICAM 
Red
Green
Select 
or 
(force mono) to hear the STEREO or MONO broadcast respectively.
Monaural sound broadcast
When a monaural program is received, sound mode display will appear in green.
You can press the CH I / II button to select the sound mode between monaural and forced mono (sound is same).
Each time the button is pressed, or ▼ (force mono) appear cyclically on the screen.
8
NOTE
•If sound signal is not strong enough for quality reception, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
•If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
47