Hitachi 42PD7800, 32PD7800 user manual Selected characters Setup hint, PAL Secam

OPERATING INSTRUCTIONS (continued)

SETUP MENU (TV mode) (continued)

Selected characters

Setup hint

Auto Tuning

Select the channel entry method between position setting or direct

setting. And press the OK button to fix it.

Mode

Position

Direct

• If [Position] is selected, the screen display will be numbers (1~199

and AV00).

• If [Direct] is selected, the screen display will be C✱✱ at the chan-

nel 0~99 and S✱✱ at the channel 100~199.

Search

–

–

Press the OK button and it starts the auto tuning.

Manual Tuning

Position

–

–

Set the position number(0~199) or channel number(C✱✱, S✱✱) by

(+) (–) CHANNEL UP/DOWN buttons.

• If [Position] has been selected, search the frequency here by

Frequency

–

–

pressing

and

buttons.

• If [Direct] has been selected, this function will be not available

(grayed out).

This is used to input the name of the TV station within 5 letters. After

fixing the cursor on the first digit, select a letter by

and

Name

SELECT buttons and move to next digit by

ADJUST button.

( :a letter)

Press the OK button again after finished.

• Selectable letters are “0”~”9”, ”A”~”Z”, “+”, “–”, ” ”(blank),

”,”(comma) and ”.”(period) .

Sound System

Auto

M

BG

Select the sound system through the 5 different settings.

DK

I

Color System

Auto

PAL

SECAM

Select the color system through the 5 different settings.

NTSC3.58

NTSC4.43

Off

On

If this is set to On, that position will be skipped while selecting posi-

Skip

tions by CHANNEL UP/DOWN buttons.

This is automatically set to On for those non-broadcasting channels.

NR

Off

On

If this is set to On, it helps to reduce the noise interference visible on

the screen, especially in the weaker signal reception areas.

Antenna Att.

Off

On

If this is set to On, it helps to reduce the noise interference visible on

the screen in case of strong airwave.

Fine Tuning

Decreasing the frequency

Increasing the frequency data

After completing the fine-tuning, press the RETURN button to exit

data for the main tuner

for the main tuner.

this mode.

• The variable range is -56 ~ +56.

Sort

(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)

Press OK button at the a line that is required to change order, then

(A Line of position List)

–

–

the characters will change to green. And move it up or down in the

list by pressing

and

SELECT buttons. And press OK button

to complete it. Press the RETURN button to exit.

Select the teletext language through the 4 settings.

Teletext Language

–

–

• Select West Europe when watch in Singapore, Australia, Malaysia,

and so on.

Off

On

If this is set to On, the power will be turned off when there is no

Auto Off

transmission signal and no operation for about 10 minutes in the TV

mode.

ENGLISH

35