Hitachi 32PD7800, 42PD7800 user manual Movie

OPERATING INSTRUCTIONS (continued)

SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) (Continued)

Selected characters									Setup hint
Vertical Filter				Off		On			Turn On when concerned about screen flicker.
Frequency Mode			Movie				PC		Set to Movie when viewing moving images on a personal computer.
RGB1		DVI-PC				DVI-STB			This should correspond to the signal mode of the signal from the
									equipment that is connected to RGB1 DVI terminal.
RGB2 (1st step)		RGB			Component				This should correspond to the signal mode of the signal from the
									equipment that is connected to RGB2 D-sub terminal.
									This step should be set only when [Component] is selected on the
									1st step.
									This should correspond to the signal mode of the signal from the
RGB2 (2nd step)	Auto			HDTV				SDTV/DVD	equipment that is connected to RGB2 D-sub terminal.
									• Normally, set this to Auto. The signal mode of the input signal will
									be automatically recognized.
									• If the input signal contains much noise or has a low level at Auto
									and the operation is found erratic, set this to match the input signal.

* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.

38