Operating Instructions Displaying Multi Picture

OPERATING INSTRUCTIONS (continued)

Displaying MULTI PICTURE (continued)

Activating the Split mode from the video input screen

Pressing the MULTI PICTURE button one time will display 2 pictures.

•The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of the video will be output from the side on which the speaker icon is located.

•The same video input mode cannot be selected for both screens at the same time.

•Pressing the MULTI PICTURE button again will cancel the 2 pictures display.

•Refer to the table for 2 pictures (Split) mode.

AV1

AV2

Activating the MULTI PICTURE mode from the RGB input screen

Pressing the MULTI PICTURE button one time will display 2 pictures.

•This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input.

•The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of the video will be output from the side on which the speaker icon is located.

•The sub-screen position can be selected up and down by pressing and SELECT buttons.

• The sub-screen can be selected with the AV1 AV6, TV channel buttons from the status that the speaker icon appears on the left side of AV✱ etc. as shown in the diagram to the right.

•Pressing the MULTI PICTURE button again will cancel the 2 pictures display.

•"Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the component signal of 1080i/50 or 1080i/60.

AV1: Displays the VIDEO input signal of the sub-screen.

RGB2

AV1

(Sub- screen)

NOTE

•Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not change to power save mode.

•Please be careful since image retention will occur if display is left in a multi picture display state for a long period of time.

2 Pictures (Split)

Input terminal

AV1

AV5

AV1, AV2, AV6

RGB1

RGB2

Sub

PAL

NTSC3.58

576i 480i

TELE

1080i/50

1080i/60 720p/60

STB

Component

TEXT

Main

SECAM

NTSC4.43

576p 480p

AV1

PAL, SECAM

AV5

NTSC3.58/4.43

AV1

576i, 576p

480i, 480p

AV2

1080i/50

AV6

1080i/60

720p/60

RGB1

STB

RGB2

Component

(

: Available)

Teletext is available only for TV

4 Pictures

Input terminal

AV1

AV5

AV1, AV2, AV6

RGB1

RGB2

Main

Sub

PAL

NTSC3.58

576i 480i

TELE

1080i/50

1080i/60 720p/60

STB

Component

TEXT

Main

SECAM

NTSC4.43

576p 480p

AV1

PAL, SECAM

NTSC3.58/4.43

576i, 576p

AV1

480i, 480p

AV2

1080i/50

AV6

1080i/60

720p/60

RGB1

STB

RGB2

Component

(

: Available)

Sub

Sub 1

Sub 2

Sub 3