Login Information
NOTES:
• A mouse, keyboard, and monitor must be connected to the VNM Recorder to log in to 
the unit itself.
• Login information is case sensitive.
• It is only necessary to log in to the VNM Recorder when it requires configuration. The 
VNM Recorder does not require login information for normal operation.
Log in to the VNM Recorder using the Red Hat® Enterprise Linux® login page (see figure 8). The default login information is as follows.
zz Administrator username — root
zz Administrator password — Extron2010 zz Guest username — matrix_rec
zz Guest password — matrix
If necessary, the administrator password, guest username, and guest password can be changed. New usernames can also be added.
NOTE: | The procedures detailed within this guide use the administrator username |
and password to configure the recorder. It is recommended that the administrator | |
username and password is only given to those who require it. Others should be using | |
the guest login information (or a created personal login) to access the recorder so that | |
important configuration settings cannot be changed. | |
To change the administrator password:
1.From the menu bar on the desktop, select System > Administration > Root Password.
2.If prompted for an administrator password, type in the appropriate password. The default administrator password is listed above.
3.Follow the remaining prompts to change the password.
To add or change usernames and passwords:
1.From the menu bar on the desktop, select System > Administration > Users and Groups.
2.The User Manager window appears. Use this window to add, modify, or delete users. Click on the Help menu for more information.
VNM Recorder • Recorder Configuration and Hardware Setup | 14 |