Extron electronic 68-1998-01 REV. C manual About Alarms, Overview

Page 61

About Alarms

NOTE:

Simple Network Management Protocol (SNMP) is not compatible with the

VNM Recorder and not covered in this user guide. For information on using SNMP,

see the VN-Matrix 200 Series User Guide, VN-Matrix 225 Series User Guide, VN-

Matrix 300 User Guide, and the VN-Matrix 325 User Guide.

This section provides information on:

zz Overview

zz Alarms Page

zz Alarm Logs Page

zz Alarm Reference Tables

Overview

The VN-Matrix system is configured to generate alarms for error conditions. A list of these error conditions and their meanings are presented on the following pages.

Alarms can be monitored using the web interface at the following locations.

zz On the Alarms page in the list that is immediately below the Filter Settings box. This details the alarm conditions that are currently active on the system.

zz On the Alarm Logs page in the list that is immediately below the Filter Settings box. This provides a historical log of when an alarm condition was raised and cleared.

zz On the Device List page where a traffic light system represents the status of connected devices.

zz On the top right hand corner of each page in the web interface where the device status and system status is displayed.

Alarm conditions, when triggered, remain active for the entire duration of the error condition and for an additional five seconds after the error has cleared.

VNM Recorder • About Alarms

55

Page 60 Page 62
Image 61
Page 60 Page 62
Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsAbout RAID5 Storage Transport Protocols Used for StreamingDecoder device Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesFront Panel Features Installation OverviewPanels Cabling Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureTo change the administrator password Login InformationTo add or change usernames and passwords Using the Front Panel VNM Recorder Power Down ProcedureIf the VNM Recorder is not logged into If the VNM Recorder is logged intoFrom the login screen Using the Keyboard and MouseChoosing the Controller Device From the Linux desktopDefault Network Settings Configuring the VNM RecorderConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsClock Management VN-Matrix Encoder and Decoder ConfigurationController Licensing Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsCreating a Directory Setting a Stream Storage LocationFolder Icon Loading Icon Alert Icon Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectorySetting up a VN-Matrix Codec as a Decoder Initial Setup and ConfigurationRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Recording a Stream Switching a Codec between Encoder and DecoderRecording Preparation Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamPause Playback Initialize PlaybackStop Playback Start and Finish TimesFile Structure Using BookmarksPlayback of Bookmarked Streams Deleting BookmarksAbout Alarms Filter Settings AlarmsAlarm Severity Alarm TypeApplying Alarm Filter Settings Alarm Severity DescriptionAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Type Description Encoder Alarm Reference TablesAlarm Type Description Action Default Settings Alarm Type Description System Controller Alarm Type Description DecoderIncluded Parts InformationPart Number Guest username matrixrec Guest password matrix Firmware UpdatesPreparing the Firmware Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveRack Installation Tower InstallationMounting UL Guidelines for Rack MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack Europe and Africa China USA, Canada, South America Central America JapanAsia Middle East
Top Page Image Contents