Recorder Page
This page is accessed by selecting the VNM Recorder device on the Device List page (see page 26) and then clicking the Recorder icon located on the Configuration panel of the Recorder Device page (see page 28).
1 | 2 | 3 |
4
5
Figure 21. Recorder Page
The Recorder page controls the recording functionality of the VNM Recorder. The recorder is capable of recording up to five simultaneous channels. Each channel contains one video stream. In addition, a channel may also contain audio and data elements if these are present and enabled at the encoder.
NOTES: |
• The audio and data elements can be recorded, but in order to do so, those elements |
must be selected using the appropriate check boxes (audio, wb, |
and data). |
• The ability of the VNM Recorder to record multiple streams depends on the bandwidth |
of the source data streams and the disc writing capability of the recorder hardware. |
Aname — The device name can be modified by editing this field and clicking Update. The name should be comprised of letters, numbers, and the underscore character. Spaces can be used, but should be avoided if possible.
BStorage Path — Data is recorded in the directory specified in this field. This is modified on the Navigate page that can be accessed by clicking on either the Storage Path link or the Navigate tab at the top of the Recorder page. For more information on changing the storage path, see the Navigate Page section (see page 32).
CBookmark button — Clicking on this button during a recording sets a reference point within the stream that can be retrieved later. A new reference point is placed within the stream each time the button is pressed and allows for multiple reference points to be set. See the Using Bookmarks section on page 54 for more information.
NOTE: The bookmark button on this page only works while recording a stream.
DBandwidth — This
VNM Recorder • About the | 30 |