Extron electronic 68-1998-01 REV. C manual Vnm

Page 35

B Device Setup panel — This panel controls various global actions for the device.

zz

Device Type — This field will always display storage as the device type for the

 

VNM Recorder and cannot be changed.

 

NOTE:

When this field displays none, source, or display, it means that the

 

device is a codec, encoder, or decoder.

zz Mode — A device can be configured using four modes.

NOTE:

This configuration option is not available for the

VNM

Recorder. These

modes are detailed for reference purposes.

 

 

zz zz

enable — This is normal operation.

disable — Using this mode on a source device stops streaming to the network, but still shows pass-through output. Using this mode on a display device outputs a splash screen in place of normal data.

zz standby — Using this mode on a source device stops streaming and disables pass-through output. Using this mode on a display device disables all output. VN-Matrix 300 / 325 devices do not support standby mode.

zz test — Using this mode on a device (source or display) shows a splash screen with the words "Test Mode". Normal streaming is suspended.

zz Data Interface — This option allows the streaming interface to be specified. Currently, the only option available is Cat6, which uses the eth0 (primary) network interface.

zz Multicast TTL — This field is used to specify the number of hops multicast traffic will make between routed domains when it exits a source. It is not used for TCP or unicast RTP traffic and is only used on a source.

CLicensed Features panel — This panel is used to manage the device license and indicates what features the user has access to. If the device has an incorrect checksum for the licensed features, a license error message will be shown and the device will not support streaming functions.

NOTE:

The VNM Recorder contains a default license that allows for five recorder

channels and five player channels. It is

currently not possible to change the

device license on the VNM Recorder.

 

CAUTION: DO NOT place controller license information into this panel. Doing this may cause the VNM Recorder to stop responding. This panel is used for device licenses only. See Controller Licensing on page 42 of the Accounts Page section for information about controller licenses.

DConfiguration panel — This panel indicates what features the user is able to control. Each device consists of a number of components which are accessed by clicking on the appropriate links.

The Recorder icon accesses the pages that manage the recording of VN-Matrix PURE3 streams to the VNM Recorder hard disk.

The Player icon accesses the pages that manage the playback of previously recorded VN-Matrix PURE3 streams.

VNM Recorder • About the Web-based User Interface

29

Page 34 Page 36
Image 35
Page 34 Page 36
Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsDecoder device Transport Protocols Used for StreamingAbout RAID5 Storage Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesPanels Cabling Installation OverviewFront Panel Features Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureTo add or change usernames and passwords Login InformationTo change the administrator password If the VNM Recorder is logged into VNM Recorder Power Down ProcedureUsing the Front Panel If the VNM Recorder is not logged intoFrom the Linux desktop Using the Keyboard and MouseFrom the login screen Choosing the Controller DeviceConfiguring the Network and IP Address Settings Configuring the VNM RecorderDefault Network Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsController Licensing VN-Matrix Encoder and Decoder ConfigurationClock Management Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsFolder Icon Loading Icon Alert Icon Setting a Stream Storage LocationCreating a Directory Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectoryRecording Playing Streams Initial Setup and ConfigurationSetting up a VN-Matrix Codec as a Decoder Setting up a VN-Matrix Codec as an Encoder Recording Preparation Switching a Codec between Encoder and DecoderRecording a Stream Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamStart and Finish Times Initialize PlaybackPause Playback Stop PlaybackDeleting Bookmarks Using BookmarksFile Structure Playback of Bookmarked StreamsAbout Alarms Filter Settings AlarmsAlarm Severity Description Alarm TypeAlarm Severity Applying Alarm Filter SettingsAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Type Description Action Default Settings Alarm Reference TablesAlarm Type Description Encoder Alarm Type Description System Controller Alarm Type Description DecoderPart Number InformationIncluded Parts Preparing the Firmware Firmware UpdatesGuest username matrixrec Guest password matrix Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveUL Guidelines for Rack Mounting Tower InstallationRack Installation MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack Asia Middle East USA, Canada, South America Central America JapanEurope and Africa China
Top Page Image Contents