Extron electronic 68-1998-01 REV. C manual Terminal window. Manually close the terminal window

Page 73

7.	The firmware installation is complete when the command prompt is displayed in the
	terminal window. Manually close the terminal window.
	NOTE:	The recording application is a service, which means that no application
	window will open after the installation has completed.
8.	To finalize the firmware installation, reboot the VNM Recorder by powering down and
	powering up the unit. See the VNM Recorder Power Down Procedure section on
	page 15 and the VNM Recorder Power Up Procedure section on page 13 for more
	information.
9.	When the VNM Recorder has powered back on, it is necessary to set the folder location
	where the recordings are stored. See Update Path on page 33 and Make Directory
	on page 34 of the Navigate Page section for details.

VNM Recorder • Firmware Updates

67

Image 73

Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsAbout RAID5 Storage Transport Protocols Used for StreamingDecoder device Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesFront Panel Features Installation OverviewPanels Cabling Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureTo change the administrator password Login InformationTo add or change usernames and passwords Using the Front Panel VNM Recorder Power Down ProcedureIf the VNM Recorder is not logged into If the VNM Recorder is logged intoFrom the login screen Using the Keyboard and MouseChoosing the Controller Device From the Linux desktopDefault Network Settings Configuring the VNM RecorderConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsClock Management VN-Matrix Encoder and Decoder ConfigurationController Licensing Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsCreating a Directory Setting a Stream Storage LocationFolder Icon Loading Icon Alert Icon Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectorySetting up a VN-Matrix Codec as a Decoder Initial Setup and ConfigurationRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Recording a Stream Switching a Codec between Encoder and DecoderRecording Preparation Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamPause Playback Initialize PlaybackStop Playback Start and Finish TimesFile Structure Using BookmarksPlayback of Bookmarked Streams Deleting BookmarksAbout Alarms Filter Settings AlarmsAlarm Severity Alarm TypeApplying Alarm Filter Settings Alarm Severity DescriptionAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Type Description Encoder Alarm Reference TablesAlarm Type Description Action Default Settings Alarm Type Description System Controller Alarm Type Description DecoderIncluded Parts InformationPart Number Guest username matrixrec Guest password matrix Firmware UpdatesPreparing the Firmware Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveRack Installation Tower InstallationMounting UL Guidelines for Rack MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack Europe and Africa China USA, Canada, South America Central America JapanAsia Middle East