Extron electronic 68-1998-01 REV. C manual Advanced Configuration

Advanced Configuration

This section provides information on the web-based interface pages used for advanced configuration of the VNM Recorder. The advanced configuration pages associated with the VNM Recorder are listed below.

zz Config Page

zz Accounts Page

Config Page

This page is accessed by selecting the VNM Recorder device on the Device List page (see page 26), selecting the Player icon located on the Configuration panel of the Recorder Device page (see page 28), and then clicking on one of the icons in the video, audio, wb, and data columns (see channel on page 37 of the Player Page section).

12

3

4

5

6

7

Figure 24. Config Page

NOTES:

• The settings on this page should not be modified since most of the settings in a

recording are controlled from the Player page. The only exception to this is when enabling multicast transport for a selected playback stream by selecting the

Multicast Enable check box.

• Transport protocols must be kept consistent between the video and audio elements.

The Config page modifies a single channel element of a VN-Matrix stream. This page is primarily used to monitor the current number of transport connections as well as to select or unselect Multicast Enable (see Streams panel on page 40) when using

RTP streaming. The other control options on this page are detailed for reference purposes. The control options for the Config page are detailed on the next page.

VNM Recorder • About the Web-based User Interface 38