Extron electronic 68-1998-01 REV. C manual Zz Playback Finish This is automatically filled in when

Page 45

Aname — The channel name can be modified by editing this field and clicking Update. This name is visible during source selection on a decoder (display) as well as during file selection on a recorder. The name should be comprised of letters, numbers and the underscore character. Spaces can be used, but should be avoided if possible.

BPlayback Controls — See the Player Page section on page 35 for more information on playback controls.

. netSlave (not shown) — See the Player Page section on page 35 for more information. This setting should not be modified on this page.

NOTE:

The netSlave option is only available when video-player0 is selected. For

all other selections, only slave to master is available.

Cslave to master — Checking this box causes the current player channel to synchronize its playback control to its local master channel (Video channel-0).

NOTES:

•

This setting is enabled by default and should not be modified.

•

The slave to master check box is available on all channels except

 

video‑player0.

zz

zz

When checked, all video channels are always synchronized to Video channel-0. This allows the playback controls to affect all of the playback channels simultaneously.

When unchecked, individual playback channels can be controlled using the playback controls.

NOTE:

The audio, whiteboard, and data elements are always synchronized to

their associated video channel.

. auto repeat (not shown) — See the Player Page section on page 35 for more

information.

NOTE:

The auto repeat option is only available when video-player0 is selected.

For all other selections, only slave to master is available.

DMedia panel — This panel contains the following parameters.

NOTE:

The information contained in this panel is created from information supplied

by the Player page and should not be modified unless absolutely necessary.

zz Playback Path — Type in the location of the file or directory or choose a file from the Content Directory to automatically fill in this field.

NOTE: Typed in changes made to this field

will only

be implemented when

Update is clicked.

 

 

zz Playback Date — This is automatically filled in

when a file has been chosen from

the Content Directory or when a file location is

manually

entered into thePlayback

Path field.

 

 

zz Playback Start — This is automatically filled in the Content Directory or when a file location is Path field.

when a file has been chosen from manually entered into thePlayback

zz Playback Finish — This is automatically filled in when

a file has been chosen from

the Content Directory or when a file location is manually

entered into thePlayback

Path field.

 

 

VNM Recorder • About the Web-based User Interface

39

Page 44 Page 46
Image 45
Page 44 Page 46
Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsTransport Protocols Used for Streaming About RAID5 StorageDecoder device Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesInstallation Overview Front Panel FeaturesPanels Cabling Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureLogin Information To change the administrator passwordTo add or change usernames and passwords Using the Front Panel VNM Recorder Power Down ProcedureIf the VNM Recorder is not logged into If the VNM Recorder is logged intoFrom the login screen Using the Keyboard and MouseChoosing the Controller Device From the Linux desktopConfiguring the VNM Recorder Default Network SettingsConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsVN-Matrix Encoder and Decoder Configuration Clock ManagementController Licensing Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsSetting a Stream Storage Location Creating a DirectoryFolder Icon Loading Icon Alert Icon Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectoryInitial Setup and Configuration Setting up a VN-Matrix Codec as a DecoderRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Switching a Codec between Encoder and Decoder Recording a StreamRecording Preparation Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamPause Playback Initialize PlaybackStop Playback Start and Finish TimesFile Structure Using BookmarksPlayback of Bookmarked Streams Deleting BookmarksAbout Alarms Filter Settings AlarmsAlarm Severity Alarm TypeApplying Alarm Filter Settings Alarm Severity DescriptionAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Reference Tables Alarm Type Description EncoderAlarm Type Description Action Default Settings Alarm Type Description System Controller Alarm Type Description DecoderInformation Included PartsPart Number Firmware Updates Guest username matrixrec Guest password matrixPreparing the Firmware Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveRack Installation Tower InstallationMounting UL Guidelines for Rack MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack USA, Canada, South America Central America Japan Europe and Africa ChinaAsia Middle East
Top Page Image Contents