Extron electronic 68-1998-01 REV. C manual Recorder Device

Page 34

Recorder Device Page

This page is accessed by selecting the VNM Recorder device on the Device List page (see page 26).

1

2

3

4

Figure 20. Recorder Device Page

The Recorder Device page shows the basic status for a VNM Recorder device. The device information is presented in four panels.

NOTE:

This guide references the Device page for the VNM Recorder only. See the

other device user guides or click on the Help tab for information on device specific

control options.

ADevice Summary panel — This panel indicates the connection status of the device and the status of the management link between the device and the system controller.

zz Name — The device name can be modified by typing in a new name into this field and clicking Update. The name should be comprised of letters, numbers and the underscore character. Spaces should be avoided.

zz

Serial Number — The field displays the

serial number

of the

device.

zz

Device Status — This field indicates the

management

state

of the device. Normally

 

it should show Active, but if the device is missing or it cannot be contacted via the

 

controller it will show No Device.

 

 

 

zz IP address:port(cport) — This field displays the IP address of the current device, the UDP port the device is using to communicate with the controller, and the controller UDP port it is contacting.

zz Link Status — When a device is active, this field displays the quality of the management link between the device and the system controller. A link status of Good indicates little or no management packet loss. A link status of Fair indicates a small amount of packet loss. A link status of Poor indicates a bad link; investigate whether the link to the device has sufficient bandwidth to carry the data and management traffic.

VNM Recorder • About the Web-based User Interface

28

Page 33 Page 35
Image 34
Page 33 Page 35
Contents User Guide Safety Instructions Specifications Availability FCC Class a NoticeConventions Used in this Guide Contents Reference Information About this Guide About the VNM RecorderOverview of Recorded Streams Overview of Stream PlaybackAbout RAID5 Storage Transport Protocols Used for StreamingDecoder device Multicast RTP An Overview Multicast RTP StreamingUnicast RTP An Overview Unicast RTP StreamingUnicast TCP An Overview Unicast TCP StreamingFeatures DefinitionsFront Panel Features Installation OverviewPanels Cabling Status LED Icons Rear Panel Features Parallel/Printer connector not usedPin connector not active/used Configuration Hardware Setup Setup OverviewVNM Recorder Power Up Procedure VNM Recorder Login ScreenTo change the administrator password Login InformationTo add or change usernames and passwords If the VNM Recorder is not logged into VNM Recorder Power Down ProcedureUsing the Front Panel If the VNM Recorder is logged intoChoosing the Controller Device Using the Keyboard and MouseFrom the login screen From the Linux desktopDefault Network Settings Configuring the VNM RecorderConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Configuring the VN-Matrix Encoders and Decoders Stage 3 Restart the VNM RecorderAbout Web-based Overview of the Web-based User InterfaceAccessing the Web-based User Interface Controller LoginWeb-based User Interface Control Options Device ListDevice List Five channel VNM RecorderThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerSelecting a recording for replay Stop Pause Play BookmarkConfig Advanced Configuration ConfigZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsClock Management VN-Matrix Encoder and Decoder ConfigurationController Licensing About the Content Directory OverviewContent Directory Basics Navigate Page Content DirectoryCreating a Directory Setting a Stream Storage LocationFolder Icon Loading Icon Alert Icon Understanding Saved Recordings With Multiple Elements Navigate Page Multiple Element RecordingRenaming a Stream or Directory Deleting a Stream or DirectorySetting up a VN-Matrix Codec as a Decoder Initial Setup and ConfigurationRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Recording a Stream Switching a Codec between Encoder and DecoderRecording Preparation Initialize Recording Stop RecordingPlaying a Recorded Stream Playback PreparationStop Playback Initialize PlaybackPause Playback Start and Finish TimesPlayback of Bookmarked Streams Using BookmarksFile Structure Deleting BookmarksAbout Alarms Alarms Filter SettingsApplying Alarm Filter Settings Alarm TypeAlarm Severity Alarm Severity DescriptionAlarm List Alarms Page Alarm List SortingAlarm Logs Alarm LogsAlarm Type Description Encoder Alarm Reference TablesAlarm Type Description Action Default Settings Alarm Type Description Decoder Alarm Type Description System ControllerIncluded Parts InformationPart Number Guest username matrixrec Guest password matrix Firmware UpdatesPreparing the Firmware Gathering Firmware Installation Information Installing the Firmware Config.xml and Admin.xml Text FilesFirmware Installation Table below Terminal window. Manually close the terminal window Browser Configuration Microsoft Internet Explorer version 7 or abovePer Site Internet Options Custom Level Security Options Mozilla Firefox version 1.3 or above Cookie PreferencesMounting Tower InstallationRack Installation UL Guidelines for Rack MountingRack Mounting Identifying the Sections of the Rack RailsPreparing to Install the Rails Installing the VNM Recorder into a Rack Europe and Africa China USA, Canada, South America Central America JapanAsia Middle East
Top Page Image Contents