Extron electronic 68-1998-01 REV. C That the current and persistent databases remain up-to-date

Page 33

B Mode Icons — The current configuration status of each device is identified by an icon.

?

An undefined device.

A device configured as an encoder (source).

A device configured as a decoder (display).

A VNM Recorder.

CAlarm Status Icons — The alarm status of a device is indicated by a colored icon. For more information on alarm statuses, see the "About Alarms" section on page 55 or click on the Alarms tab and then click on the Help tab within the web-based user interface.

A device which has not contacted the controller this session.

A device under active control with no alarms.

A device under active control showing warning alarms.

A device under active control showing critical alarms.

D Name — The device name is shown in this column. To change the name of the device,
see the "Recorder Device Page" section on page 28.
E IP Address — The IP address of the device is shown in this column.
NOTE:	The IP address of the device is only shown if the device is currently present
on the network and configured to use the controller.
F Version — This column shows the current firmware version installed onto each device.
NOTE:	To avoid compatibility issues, all devices must have the same version of
firmware installed onto each device.
G Del — This column is used to remove devices from the VN-Matrix network. Clicking on
the red X icon brings up a confirmation dialog. Click OK to delete the selected device
from the database. Devices can only be deleted when the physical device is not actively
being managed and when active connections have been disconnected from the device.
Before deleting the device, the system carries out an implicit "save all" action to ensure
that the current and persistent databases remain up-to-date.

VNM Recorder • About the Web-based User Interface

27

Image 33

Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsTransport Protocols Used for Streaming About RAID5 StorageDecoder device Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesInstallation Overview Front Panel FeaturesPanels Cabling Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureLogin Information To change the administrator passwordTo add or change usernames and passwords Using the Front Panel VNM Recorder Power Down ProcedureIf the VNM Recorder is not logged into If the VNM Recorder is logged intoFrom the login screen Using the Keyboard and MouseChoosing the Controller Device From the Linux desktopConfiguring the VNM Recorder Default Network SettingsConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsVN-Matrix Encoder and Decoder Configuration Clock ManagementController Licensing Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsSetting a Stream Storage Location Creating a DirectoryFolder Icon Loading Icon Alert Icon Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectoryInitial Setup and Configuration Setting up a VN-Matrix Codec as a DecoderRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Switching a Codec between Encoder and Decoder Recording a StreamRecording Preparation Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamPause Playback Initialize PlaybackStop Playback Start and Finish TimesFile Structure Using BookmarksPlayback of Bookmarked Streams Deleting BookmarksAbout Alarms Filter Settings AlarmsAlarm Severity Alarm TypeApplying Alarm Filter Settings Alarm Severity DescriptionAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Reference Tables Alarm Type Description EncoderAlarm Type Description Action Default Settings Alarm Type Description System Controller Alarm Type Description DecoderInformation Included PartsPart Number Firmware Updates Guest username matrixrec Guest password matrixPreparing the Firmware Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveRack Installation Tower InstallationMounting UL Guidelines for Rack MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack USA, Canada, South America Central America Japan Europe and Africa ChinaAsia Middle East