Extron electronic 68-1998-01 REV. C Alarm Type, Alarm Severity, Applying Alarm Filter Settings

Page 63

Alarm Type

This drop-down menu lists the available alarm error conditions for all units. Alarm error conditions are divided into two categories:

zz Alarm errors that occur on an encoder zz Alarm errors that occur on a decoder

In addition, there is one alarm error that only occurs on the device that is configured as the system controller.

See the Alarm Reference Tables section on page 60 for more information.

Alarm Severity

Alarms may be set to one of three severities.

Alarm Severity	Description


Critical	A red colored traffic light indicator for the device (see Alarm Status
	Icons on page 27 of the Device List Page section) will be displayed.

Warning	When triggered, a warning alarm will result. An amber colored traffic
	light indicator for the device (see Alarm Status Icons on page 27 of
	the Device List Page section) will be displayed.

None	A setting of Default (None) effectively filters the alarm condition.
	The alarm still appears in the alarms list, but it will not affect any
	colored indicators.

Applying Alarm Filter Settings

Apply the alarm filter settings by clicking Apply Filter Change.

NOTE: Changes will be lost after the VN-Matrix system is powered down unless the Save All tab is clicked to make changes permanent.

VNM Recorder • About Alarms

57

Image 63

Contents User Guide Safety Instructions FCC Class a Notice Specifications AvailabilityConventions Used in this Guide Contents Reference Information About the VNM Recorder About this GuideOverview of Stream Playback Overview of Recorded StreamsTransport Protocols Used for Streaming About RAID5 StorageDecoder device Multicast RTP Streaming Multicast RTP An OverviewUnicast RTP Streaming Unicast RTP An OverviewUnicast TCP Streaming Unicast TCP An OverviewDefinitions FeaturesInstallation Overview Front Panel FeaturesPanels Cabling Status LED Icons Parallel/Printer connector not used Rear Panel FeaturesPin connector not active/used Setup Overview Configuration Hardware SetupVNM Recorder Login Screen VNM Recorder Power Up ProcedureLogin Information To change the administrator passwordTo add or change usernames and passwords If the VNM Recorder is logged into VNM Recorder Power Down ProcedureUsing the Front Panel If the VNM Recorder is not logged intoFrom the Linux desktop Using the Keyboard and MouseFrom the login screen Choosing the Controller DeviceConfiguring the VNM Recorder Default Network SettingsConfiguring the Network and IP Address Settings Ethernet Device Window Confirm Settings Window Stage 2 Setting the controller IP address Config.xml Text Window Stage 3 Restart the VNM Recorder Configuring the VN-Matrix Encoders and DecodersOverview of the Web-based User Interface About Web-basedController Login Accessing the Web-based User InterfaceDevice List Web-based User Interface Control OptionsFive channel VNM Recorder Device ListThat the current and persistent databases remain up-to-date Recorder Device Recorder DeviceVNM Recorder RecorderChannel contains the following parameters Navigate NavigateTo be deleted Make Directory Use this field to add a new directory Player PlayerStop Pause Play Bookmark Selecting a recording for replayConfig Config Advanced ConfigurationZz Playback Finish This is automatically filled in when FEC Forward Error Correction panel Currently not supported Accounts AccountsVN-Matrix Encoder and Decoder Configuration Clock ManagementController Licensing Overview About the Content DirectoryNavigate Page Content Directory Content Directory BasicsSetting a Stream Storage Location Creating a DirectoryFolder Icon Loading Icon Alert Icon Navigate Page Multiple Element Recording Understanding Saved Recordings With Multiple ElementsDeleting a Stream or Directory Renaming a Stream or DirectoryInitial Setup and Configuration Setting up a VN-Matrix Codec as a DecoderRecording Playing Streams Setting up a VN-Matrix Codec as an Encoder Switching a Codec between Encoder and Decoder Recording a StreamRecording Preparation Stop Recording Initialize RecordingPlayback Preparation Playing a Recorded StreamStart and Finish Times Initialize PlaybackPause Playback Stop PlaybackDeleting Bookmarks Using BookmarksFile Structure Playback of Bookmarked StreamsAbout Alarms Filter Settings AlarmsAlarm Severity Description Alarm TypeAlarm Severity Applying Alarm Filter SettingsAlarms Page Alarm List Sorting Alarm ListAlarm Logs Alarm LogsAlarm Reference Tables Alarm Type Description EncoderAlarm Type Description Action Default Settings Alarm Type Description System Controller Alarm Type Description DecoderInformation Included PartsPart Number Firmware Updates Guest username matrixrec Guest password matrixPreparing the Firmware Gathering Firmware Installation Information Config.xml and Admin.xml Text Files Installing the FirmwareFirmware Installation Table below Terminal window. Manually close the terminal window Microsoft Internet Explorer version 7 or above Browser ConfigurationPer Site Internet Options Custom Level Security Options Cookie Preferences Mozilla Firefox version 1.3 or aboveUL Guidelines for Rack Mounting Tower InstallationRack Installation MountingIdentifying the Sections of the Rack Rails Rack MountingPreparing to Install the Rails Installing the VNM Recorder into a Rack USA, Canada, South America Central America Japan Europe and Africa ChinaAsia Middle East