Runco XP-65, XP-50 operation manual SET UP Signal Screensaver

Operation

SET UP ➤ Use the controls in the SET UP menu to perform advanced image quality adjustments and access various other CinemaWall features.

SET UP	1/2
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
			COMPONENT
INPUT LABEL			DVD3
POWER SAVE			ON
STANDBY SAVE			OFF
POWER MANAGEMENT			ON
AUTO POWER OFF			ON
OSD LANGUAGE			ENGLISH (US)
		RETURN
SELECT		ACCESS
SET UP	2/2

MULTI DISPLAY SETUP

MULTI PIP SETUP

PORTRAIT SETUP

SET UP TIMER

PRESENT TIME SETUP

RETURN

SELECT ACCESS

SIGNAL: Select SIGNAL from the SET UP menu to display information about the current signal and to adjust the following settings:

•SYNC: Select the sync method used by the PC or other RGB source using the PC INPUT.

In most cases, the AUTO setting works well. However, if you know that your source outputs an RGB with sync-on-green signal and the AUTO setting does not produce a stable image, select ON G. Likewise, select VBS for a source that outputs an RGB with composite sync signal.

•3:2 PULLDOWN: To smooth out moving images from interlaced, standard-definition (SD) sources, select 3:2 PULLDOWN and set it to ON. With this setting, the CinemaWall attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the image is not stable, set 3:2 PULLDOWN to OFF.

38 CinemaWall XP-50/XP-65 Installation/Operation Manual