Sanyo PLV-HD2000E, PLV-HD2000N owner manual Operation of Remote Control, 0WIRED Remote Jack

BEFORE OPERATION

OPERATION OF REMOTE CONTROL

q

		!0
w
e		ON-OFF
r	▲	!1
	ZOOM
		!2
t	▲
	▲	!3
y	FOCUS	!4
	▲
		!5
u
		SELECT
i
o		!6
		!7
	RESET	!8

qSELECT button

Executes the item selected. (P21)

wSIGNAL EMISSION indicator

This indicator lights red while a signal is being sent from the remote control to the projector.

eSCREEN button

Selects image screen. (P29)

rZOOM button Adjusts zoom. (P24)

tFREEZE button

Freezes the projected picture. (P24)

yFOCUS button Adjusts focus. (P24)

uPOINT (UP/DOWN/LEFT/RIGHT) button

Selects an item or adjusts value in the On-Screen Menu. (P21)

iSELECT button

Executes the item selected. (P21)

oIMAGE (1-10) buttons

Selects image levels (IMAGE 1 - IMAGE 10). (P33)

!0WIRED REMOTE JACK

When using as Wired Remote Control, connect Remote Control Cable to this jack.

Battery installation is required when using as Wired Remote Control.

!1POWER ON-OFF button

Turns the projector on or off. (P23)

!2AUTO PC button

Operates the Auto PC adjustment function. (P30)

!3NO SHOW button

Turns the picture into black image. (P24)

!4MENU button

Opens or closes the On-Screen Menu. (P21)

!5LENS SHIFT button

Selects LENS SHIFT function. (P24)

!6INPUT 1-4 buttons

Selects input source (INPUT 1-INPUT 4). (P25)

!7IMAGE button

Selects image levels. (P33)

!8RESET switch

Slide this switch to the "RESET" to initialize the remote control code. (P20, 40)

19