Sanyo PLV-HD2000E, PLV-HD2000N owner manual Fig-8

6	This projector has 6 Light-Block Sheets. Use 2 Light-Block Sheets corresponding with lens. (Refer to the
	list below.) Use 1 Light-block Sheet for MODEL LNS-W03
	Set 2 Light-Block Sheets through the lens.
	Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8.

NOTE:

●Be sure to set each Light-Block Sheet as shown in Fig-8.

●Make sure the mark (TOP and BACK) on Light-Block Sheets are correct and set them properly.

Light-Block Sheets For each lens.

Lens Model No.		Type No. (Part No.)
LNS-S02, LNS-S02Z	TYPE	FA1 (610 322 7559)
	TYPE	FA2 (610 322 7894)
LNS-M01, LNS-T02, LNS-W02	TYPE	FB1 (610 322 7719)
LNS-M01Z, LNS-W02Z
	TYPE	FB2 (610 322 7351)
LNS-W01, LNS-T01, LNS-W01Z	TYPE	FC1 (610 322 8136)
LNS-T01Z, LNS-S03, LNS-W04
	TYPE	FC2 (610 322 4329)
LNS-W06
LNS-W03	TYPE	FB1 (610 322 7719)

MODEL LNS-W03

Fig-8

LIGHT BLOCK SHEETS	LIGHT BLOCK SHEET
Make sure the sheet figures are	Make sure the sheet figure is cor-
correct and put in proper position.	rect and put in proper position.

- 4 -