Sanyo PLV-HD2000E, PLV-HD2000N owner manual Key lock, Lamp counter reset, Factory default, Quit

SETTING

Key lock

This function locks the operation of the projector's control panel and the remote control.

This locks operation of the projector's control panel.

This locks operation of the remote control.

This cancels the Key lock function.

If the projector's control panel accidentally becomes locked and you do not have the remote control nearby, turn the MAIN ON/OFF switch to OFF. And then while pressing a SELECT button, return the MAIN ON/OFF switch to ON again. This will cancel the projector's control panel lock.

Lamp counter reset

Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting.

1	Turn projector on, press MENU button and ON-SCREEN
	MENU will appear. Press POINT LEFT/RIGHT button(s) to
	move a red frame pointer to SETTING Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	“Lamp counter reset” and then press SELECT button.
3	Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3
	or Lamp 4) and then press SELECT button. Message "Lamp
	replace counter Reset?" is displayed. Move pointer to [Yes] and
	then press SELECT button.
	NOTE: Be sure to reset correct lamp number otherwise LAMP
	REPLACE indicator continues lighting.
4	Another confirmation dialog box appears and select [Yes] to
	reset Lamp Replace Counter.

Do not reset Lamp Replace Counter except after Projection lamp is replaced.

Factory default

This function returns all setting values except for the lamp counter to the factory default settings.

Press POINT UP/DOWN button to move a red frame pointer to “Factory default” and then press SELECT button. The message "Return to Factory default?" is displayed. Move the pointer to [Yes] and then press SELECT button.

Another confirmation dialog box appears and select [Yes] and then press SELECT button. Return the projector to Factory default.

Quit

Closes SETTING MENU.

41