Sanyo PLV-HD2000E owner manual Automatic MULTI-SCAN System, System Menu, System Select Menu PC

BASIC OPERATION

SYSTEM SELECT

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on XGA, SXGA, SXGA+, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.)

The projector displays one of the Auto, -----, Mode 1 ~ Mode 20, or the system provided in the projector.

Auto

––––

When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment function operates to adjust projector and message “Auto” is displayed on SYSTEM Menu icon.

When image is not provided properly, manual adjustment is required. (Refer to P31 and 32.)

There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 46.)

SYSTEM MENU

SYSTEM SELECT Menu icon

Displays system being selected.

Mode 1	User preset adjustment in MANUAL PC ADJUSTMENT.
	Adjustment data can be stored in the Mode 1-20.
	Computer systems provided in the projector. The
XGA 1
	projector chooses proper system and displays it.

✽Mode 1 and XGA 1 are examples.

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to move a red frame pointer to
	SYSTEM SELECT Menu icon.
2	Press POINT UP/DOWN button to move a red arrow pointer to
	system that you want to set, and then press SELECT button.

SYSTEM SELECT MENU (PC)

SYSTEM SELECT Menu icon Displays system being selected.

Systems on this dialog box can be selected.

Custom Mode (16 ~ 20) set in DISPLAY ADJUST Menu. (P31, 32)

27