ON-SCREEN MENU OPERATION CHANNEL SETTING ___________
Display the On Screen menu and use the CURSOR ▲▼ keys to select Channel Setting. Press ENTER.
Channel Search
Auto – Searches the detected mode, Cable or Air. Cable – Searches for analog and unscrambled (ClearQAM) digital cable channels.
Air (Antenna) – Searches for analog and digital
Digital
NOTE: Digital
Channel Scan Memory
Channel Scan Memory lists all Analog and Digital channels found. It also lists Analog channels that were not found, which can be added.
Use the CURSOR ▲▼ keys to move the channel select bar through all enabled and disabled channels, or use the CH ▲▼ keys to skip all disabled channels.
Press ENTER to enable or disable the selected channel.
NOTE: For information on local digital channels, visit www.antennaweb.org
IMPORTANT FACT: This HDTV maintains only one database of digital channels. Therefore, when you search for cable chan- nels, the database of antenna digital channels will be deleted. You will only be able to receive those ClearQAM channels your cable company provides.
Input Setting
Input Setting feature allows the removal of unused inputs from the AV input loop.
Use the CURSOR ▲▼ keys to select an AV input. Press ENTER to disable (uncheck) or enable (check) the high- lighted input.
NOTE: At least one input must and will remain checked. 
:Skip is for reference only.
MAIN MENU SCREEN
CHANNEL SETTING SCREEN
CHANNEL SCAN MEMORY SCREEN
INPUT SETTING SCREEN
10 Need help? 
www.sanyoctv.com 