Sanyo DP47840 manual PIX Shape, Pix1

PIX SHAPE

4:3 TRANSMISSION 16:9 TRANSMISSION

Pix1

Shows a standard definition 4:3 image in its original format, a 16:9 wide image is slightly compressed horizontally.

NOTE: Vertical bars are “attached” to the sides of the screen.

Pix2

Fills the entire image on the screen.

NOTE: A standard definition 4:3 image is stretched horizontally.

Pix3

Image is stretched vertically in compar- isson with Pix2.

NOTE: Shows a proportional Zoom for a 4:3 image.

Pix4

Image is stretched horizontally in com- parisson with Pix3.

NOTE: Shows a proportional Zoom for a 16:9 image.

Pix5

Similar to Pix2, image is enlarged hori- zontally in a linear proportion in which center portion of screen is stretched less than the sides.

NOTE: Pix5 has almost no stretching effect on a 16:9 image.

Pix6 Similar to Pix1 with no Overscan*.

NOTE: There are other possible aspect ratios that may be transmitted besides the most common 4:3 and 16:9.

Pix7 Similar to Pix2 with no Overscan*.

* Overscan permits the image to slightly exceed bottom and top edge limitations.

NOTE: Pix6 and Pix7 are not optimal for Standard Definition content (a thin white line may appear near edge of screen). Pix6 and Pix7 use is recommended only for PC signal through HDMI.

Pix-Auto(AFD) Active Format Description. Data carried in the video stream includes coded picture frame information of the actual image, allowing the TV to adjust the Pix-Shape automatically.

NOTE: This Pix-Shape mode is available only for Digital-RF input.

Need help? www.sanyoctv.com 1-800-877-503215