Transition Networks DVP 5140K manual Installation, Connecting Channel Ports to Network

2 INSTALLATION

Direction for installing the TRANSITION Networks Multichannel Media

Converter is provided in the pages that follow.

2.1	Preparing the Site		2.2
2.2	Unpacking METTF10xx, MFETF10xx Equipment		2.3
2.3	Installing Optional Redundant Power Supply Module		2.4
	2.3.1 Setting Management Module Jumper		2.4
	2.3.2 Installing Power Supply Module		2.5
2.4	Installing Multichannel Media Converter at Site		2.6
	2.4.1	Standard Rack Installation	2.6
	2.4.2	Table-Top Installation	2.7
2.5	Powering the Multichannel Media Converter		2.8
2.6	Connecting Channel Ports to Network		2.9

2.6.1Setting FDX/HDX Channel Configuration Switches .2.9

	2.6.2	Installing Fiber-optic Cable	2.10
	2.6.3	Installing Twisted-Pair Copper Cable	2.11
2.7	Setting Network Management Parameters		2.12

2.8Connecting to TCP/IP Network Management at Remote Network

Management Station (NMS) 2.14

2.9Installing Multipport Management Software at Remote NMS .....

.............................................................................................2.15

MULTICHANNEL MEDIA CONVERTER 2.1