Transition Networks DVP 5140K manual Are Channel Links Good?

Page 37

4 MAINTENANCE

3.Are Channel Links Good?

If the T-LNK LED for a twisted pair port is OFF:

•Ensure the network device connected to the twisted-pair channel port is powered ON.

•Ensure that the twisted-pair cable is connected securely both to the channel port and to the network device.

•If the network device connected to the port is a workstation, ensure that the cable is in the crossover configuration.

•If the network device connected to the port is a hub or switch, ensure that the cable is in the straight-through configuration.

•Ensure that the network device connected to the port is operating at correct speed: 10 Mb/s or 100 Mb/s.

If the F-LNK LED for a fiber optic port is OFF:

•Ensure that the network device connected properly to the fiber-optic port is powered ON.

•Ensure that the fiber-optic cable is connected to the fiber- optic port and to the network device.

•Ensure that the network device connected to the fiber-optic port is operating at correct speed: 10 Mb/s or 100 Mb/s.

•Set the Link Test switch(es) to TEST position (to isolate fiber link faults from faults on the twisted-pair network).

Allow 5-10 seconds for all devices to link-up. All LNK LEDs should illuminated

NOTEL Remember to reset Link Test switch(es) to NORMAL after procedure is completed

•Verify that the maximum allowable loss budget on the fiber- optic cable is within acceptable limits.

If a LINK LED of a port is illuminated but there is a communication problem with the port:

•Ensure that the duplex setting is set the same on the nodes connected to the twisted-pair and to the fiber-optic ports of the media converter channel.

If all LNK LEDs are OFF but all network decices and fiber-optic cable are connected, a link-up problem is suspected:

•Contact TRANSITION Networks Technical Support.

MULTICHANNEL MEDIA CONVERTER

4.3

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Multichannel Media Converter Compliance Information Table of Contents Operation Introduction AC Power Supply Module/Optional Redundant AC PowerMedia Converter Channels Multichannel Media Converter ModelsIntroduction Reset ButtonManagement Module LEDs Multichannel Media Converter Management ModuleSerial Port Network RJ-45 Connection Multiport Management Software at RemotePage Connecting Channel Ports to Network InstallationPreparing the Site Unpacking METTF10xx, MFETF10xx Equipment InstallationSetting Management Module Jumper Installing Optional Redundant Power Supply ModuleInstalling Power Supply Module Standard Rack Installation Installing Multichannel Media Converter at SiteTable-Top Installation Powering the Multichannel Media Converter Setting FDX/HDX Channel Configuration Switches Connecting Channel Ports to NetworkSetting Full-Duplex/Half-Duplex Configuration Switches Installing Cable Installing Fiber-optic CableTesting Fiber Links Norm Test Installing Twisted-Pair Copper CableNone Setting Network Management ParametersEthernet Parameters METTF10xx, MFETF10xx TCP/IP Installing Multiport Management Software at Remote NMSPage Operation Power Supply and Link Test Switch LEDs Using Status LEDsManagement LEDs Channel LEDsOperation Using a Terminal EmulatorUsing Terminal Emulator Operation Standalone Win32* Systems Using Multiport Management Software at Remote NMSMain Power Supply Status is green for OK or red for fail Page Maintenance Is Multichannel Media Converter Receiving Power? Fault Isolation and RecoveryAre Channel Links Good? Fault Isolation and Recovery Replacing Management Module Hardware Replacement ProceduresReplacing AC Power Supply Module Power Technical SpecificationsPage Fiber-Optic Cable Channel Cable SpecificationsMETTF1011 -120 MFETF1011

DVP 5140K specifications

Transition Networks DVP 5140K is a robust device tailored for extending Ethernet networks over longer distances. This equipment stands out due to its reliability, high performance, and advanced features, making it a dependable choice for many organizations seeking to enhance their network capabilities.

One of the most notable features of the DVP 5140K is its support for Power over Ethernet (PoE). This technology allows the device to deliver both data and power to connected devices like IP cameras, wireless access points, and VoIP phones via a single Ethernet cable. The DVP 5140K supports various PoE standards, providing flexibility and ensuring compatibility with a wide range of PoE-enabled devices.

The DVP 5140K operates on an advanced switching architecture that allows it to handle a high volume of traffic without compromising performance. Its ability to process data at wire-speed ensures minimal latency and optimal throughput, which is essential for organizations that rely on real-time data transfer for operations. The device supports VLAN tagging, enabling users to create distinct network segments for improved security and performance.

Additionally, the device is designed with robust management features. It includes a web-based graphical user interface (GUI) that simplifies configuration and monitoring tasks. Network administrators can easily manage the device via SNMP (Simple Network Management Protocol), making it compatible with existing network management systems. The DVP 5140K also supports Quality of Service (QoS) settings, ensuring that critical applications receive the necessary bandwidth and prioritization.

Another significant characteristic of the DVP 5140K is its durability and suitability for various environments. The device is built with a metal chassis, providing resilience against physical impacts and environmental factors. It operates effectively in temperatures ranging from -40°C to 70°C, making it ideal for deployment in both indoor and outdoor settings.

In conclusion, Transition Networks DVP 5140K is a versatile and powerful networking solution combining PoE support, high-performance data processing, effective management tools, and durability. These features make it an excellent choice for organizations looking to expand their network infrastructure while ensuring reliability and efficiency in their operations. Whether for enterprise networks, public spaces, or industrial applications, the DVP 5140K meets the demands of modern networking with style and precision.
Top Page Image Contents