Transition Networks DVP 5140K manual Main Power Supply Status is green for OK or red for fail

Page 33

3 OPERATION

NOTE: Click the Help button OR the ? button on any screen to bring up links to an integrated set of HELP screens that CAN BE VIEWED AND PRINTED FROM ANY STANDARD HTML BROWSER:

The followng conventions are used at the Multiport Management Software graphical interface:

TP* Link, Fiber Link, TP* Activity, and Fiber Activity are either green for up/detected or dim gray for down/not detected.

Full Duplex Mode (Fast Ethernet devices only) is green when running in Full-Duplex Mode and dim gray when running in Half-Duplex Mode. To change Duplex Mode (only on Fast Ethernet devices), click on the button labeled: Toggle Duplex Mode and wait. (Several polling cycles may be required for the application to "recognize" the change.)

Main Power Supply Status is green for OK or red for fail.

Backup Power Supply Status is green for OK, red for fail, or dim gray for not installed.

Temperature provides the inside temperature of the device in degrees Celsius.

Poll Rate is the time interval, in seconds, that the application polls the managed device. To change the Poll Rate, enter a new integer value and press the "Enter" key.

System up Time is the time in days, hours, minutes, and seconds since the last power-cycle (reboot) of the managed device.

Refresh issues a "get request" on all data associated with the open screen. (Same as a poll.).

MIB2sysName field is a read/write field for the system name. To change the system name entry, type a new entry in the MIB2sysName field and press the "enter" key. Changes appear at the next polling interval.

MIB2sysLocation is a read/write field for the system location. To change the system location entry, type a new entry in the MIB2sysLocation field and press the "enter" key. Changes appear at the next polling interval.

MIB2sysContact is a read/write field for the system administrator contact. To change the system administrator contact entry, type a new entry in the MIB2sysContact field and press the "enter" key. Changes appear at the next polling interval.

MIB2sysDescription is a read-only field for the system description.

*twisted-pair

MULTICHANNEL MEDIA CONVERTER

3.7

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Multichannel Media Converter Compliance Information Table of Contents Operation Introduction AC Power Supply Module/Optional Redundant AC PowerMedia Converter Channels Multichannel Media Converter ModelsIntroduction Reset ButtonMultichannel Media Converter Management Module Management Module LEDsSerial Port Network RJ-45 Connection Multiport Management Software at RemotePage Connecting Channel Ports to Network InstallationPreparing the Site Unpacking METTF10xx, MFETF10xx Equipment InstallationSetting Management Module Jumper Installing Optional Redundant Power Supply ModuleInstalling Power Supply Module Standard Rack Installation Installing Multichannel Media Converter at SiteTable-Top Installation Powering the Multichannel Media Converter Connecting Channel Ports to Network Setting FDX/HDX Channel Configuration SwitchesSetting Full-Duplex/Half-Duplex Configuration Switches Installing Fiber-optic Cable Installing CableTesting Fiber Links Norm Test Installing Twisted-Pair Copper CableNone Setting Network Management ParametersEthernet Parameters METTF10xx, MFETF10xx TCP/IP Installing Multiport Management Software at Remote NMSPage Operation Power Supply and Link Test Switch LEDs Using Status LEDsManagement LEDs Channel LEDsOperation Using a Terminal EmulatorUsing Terminal Emulator Operation Standalone Win32* Systems Using Multiport Management Software at Remote NMSMain Power Supply Status is green for OK or red for fail Page Maintenance Is Multichannel Media Converter Receiving Power? Fault Isolation and RecoveryAre Channel Links Good? Fault Isolation and Recovery Replacing Management Module Hardware Replacement ProceduresReplacing AC Power Supply Module Power Technical SpecificationsPage Fiber-Optic Cable Channel Cable SpecificationsMETTF1011 -120 MFETF1011

DVP 5140K specifications

Transition Networks DVP 5140K is a robust device tailored for extending Ethernet networks over longer distances. This equipment stands out due to its reliability, high performance, and advanced features, making it a dependable choice for many organizations seeking to enhance their network capabilities.

One of the most notable features of the DVP 5140K is its support for Power over Ethernet (PoE). This technology allows the device to deliver both data and power to connected devices like IP cameras, wireless access points, and VoIP phones via a single Ethernet cable. The DVP 5140K supports various PoE standards, providing flexibility and ensuring compatibility with a wide range of PoE-enabled devices.

The DVP 5140K operates on an advanced switching architecture that allows it to handle a high volume of traffic without compromising performance. Its ability to process data at wire-speed ensures minimal latency and optimal throughput, which is essential for organizations that rely on real-time data transfer for operations. The device supports VLAN tagging, enabling users to create distinct network segments for improved security and performance.

Additionally, the device is designed with robust management features. It includes a web-based graphical user interface (GUI) that simplifies configuration and monitoring tasks. Network administrators can easily manage the device via SNMP (Simple Network Management Protocol), making it compatible with existing network management systems. The DVP 5140K also supports Quality of Service (QoS) settings, ensuring that critical applications receive the necessary bandwidth and prioritization.

Another significant characteristic of the DVP 5140K is its durability and suitability for various environments. The device is built with a metal chassis, providing resilience against physical impacts and environmental factors. It operates effectively in temperatures ranging from -40°C to 70°C, making it ideal for deployment in both indoor and outdoor settings.

In conclusion, Transition Networks DVP 5140K is a versatile and powerful networking solution combining PoE support, high-performance data processing, effective management tools, and durability. These features make it an excellent choice for organizations looking to expand their network infrastructure while ensuring reliability and efficiency in their operations. Whether for enterprise networks, public spaces, or industrial applications, the DVP 5140K meets the demands of modern networking with style and precision.
Top Page Image Contents